Seatronx Process Meter APM-PM Easy to Use. Easy to Read. Featuring an acclaimed easy-to-read display and a versatile set of inputs, the Process Meter takes the APM into a wide range of new industrial applications. The programmable scale and custom annunciators mean users can tailor the meter to display their critical parameters exactly how they want, while the dynamic backlighting, in conjunction with setpoints, means operators are visually alerted when a parameter is out of range. The two outputs can be used to control other systems in the process, meaning the APM Process Meter is much more than just a display. This innovative technology brings a greater level of accuracy to the APM range through input signal optimization. By using this technology, accuracy of 0.1% or better is now achieved, allowing for more precise measurement, display and control. Nonlinear sensors, such as thermocouples and pressure transducers, can also be used thanks to the new APM Configurator application that allows the user to configure up to 20 points in a non-linear conversion table. Programmable backlight color to alert user Warning flash User selectable Voltage & Current segment curved bar graph display Combined digital and bar graph display Accuracy Programmable scale Programmable 4 digit star-burst display Custom messages & annunciators USB port for custom user settings Less than 53mm deep user configurable linearization 2 outputs - digital and analog INPUT Full 4 digit readout for accuracy

SEATRONX PROCESS METER APM-PM Fluid Level Application The APM Process Meter is used to display the volume of fluid in the tank. The 4-20mA analog output from the fluid level sensor is scaled to gallons, and the custom annunciator set to “Gal”, all via the easy-to-use software application. High and low setpoints are configured so that the normal green display will flash red when the tank is too full or empty, thereby alerting the operator. Additionally the APM digital outputs are integrated in to the tank pumping system and the tank is automatically drained or filled if the setpoints are exceeded....

SEATRONX PROCESS METER APM-PM Key Features Large multi-format display that incorporates: • 40 segment bar graph display • Large 4-digit display • Separate Starburst display area for annunciators, custom messages and alarm information • Dynamic backlight color Display Range (Both Min & Max Values) Custom annunciators User-selectable backlight color and intensity Two independent alarm set-points Two independent outputs 4-20mA analog retransmission output 0.1% of input or 5mV whichever is greater 0.01% of input or 5uA whichever is greater ENVIRONMENTAL Temperature - operating Easy To Use Software...