Catalogs >
Sealite >
Universal LED Controller

Universal LED Controller
1 / 3Pages

Catalog excerpts

Universal LED Controller SL-LED-CTRL Series for rotating or fixed lenses Standard PC Configuration Tool Name Type Latitude Longitude Name Type Latitude Longitude Name Type Latitude Longitude Name Type Latitude Longitude Power in External photocell & light sensor General purpose digital input/output Serial Communication LED light source The Sealite Advantage • Single driver capable of controlling Sealite’s range of LED light sources • Built-in interface for turntable lens rotation monitoring • PC Programmer for setup, diagnostic & testing • Built-in Interface in RS232 and RS422/485 format for third party monitoring • AIS & GSM built-in options available removing the need to interconnect additional devices • General purpose inputs (two) & outputs (two) • Alarm contact for remote monitoring • Built-in interface for external photocell connection • Built-in temperature sensor • Two controllers may be connected by RS485/422 for hardwired synchronisation of more than 6 LED outputs. For instance this allows redundant control of a 12 sided LED Light source • Lighthouse can now be synchronised to breakwater or buoy channel The Universal LED Controller is used in conjunction with Sealite's LED Light Source. The model includes a range of advanced monitoring features and can deliver power up to 270 watts. The LED Controller is available in configurations for 6 sided and 12 sided light sources conveniently packaged into the same enclosure. Used in conjunction with Sealite’s LED Light Source The LED Light Source is designed to replace traditional lamps in classical lighthouse optics. Their long life and high luminous efficiency makes huge savings in energy and maintenance possible, whilst retaining the heritage value of classical optical apparatus. Advanced Monitoring The LED Controller has advanced monitoring capabilities utilising alarm relay and RS232 and RS422/485 to monitor; • • • • • • LED Controller with 110/240 supply LED status Power supply Temperature Light levels Internal fault conditions Turntable rotation speed Advanced Programming The LED Controller can be configured to suit a range of requirements including partial, phased-in or complete lighthouse modernisation. Sealite’s convenient PC Configuration Tool allows a host of features to be set including; • • • • • • Multiple intensity settings 310 flash settings including custom character Adjustable on/off lux levels Low battery threshold Alarm conditions Speed tolerance variation LED Controller works in conjunction with Sealite's SL-LED Series Light Source Redundant Failsafe The LED controller includes a series of independent driver outputs, providing redundancy as each LED is controlled by a separate output driver. LED Controller with AIS/GSM built in Sealite United Kingdom Ltd

Open the catalog to page 1

SL-LED-CTRL Series for rotating or fixed lenses \u Optional GSM Monitoring & Control A built-in GSM module for monitoring and control is also available enabling users to access diagnostic data via cell-phone. The system can also be configured to send out alarm SMS text messages to designated cellular telephone numbers. Users can also have alarms and reports sent to designated email addresses. Optional Type 1 or Type 3 AIS The Universal LED Controller is available with a built-in, low-powered Type 1 or Type 3 AIS. The unit can be monitored both by GSM and AIS simultaneously. Optional GPS...

Open the catalog to page 2

Universal LED Controller SL-LED-CTRL Series for rotating or fixed lenses A LEAVE CLEAR FOR CABLE RUNS Cable and connector detail according to order Sealite United Kingdom Ltd United Kingdom

Open the catalog to page 3