Marking Buoy Sealite have a range your representative supply your complete mooring solution • High visibility red, green, white or yellow as per IALA • 3 part product; flotation • Individual colouration of each section to suite IALA colour/configuration • Excellent buoyancy & • Easy to deploy & service • Cost effective & environmentally friendly Friendly & Recyclable Sealite buoy products are made from recyclable materials. As a service to customers, Individual components and products at the end of their service life may be returned to Sealite for recycling. grab rail wall thickness Foam filled with highly buoyant closed-cel battery access Non-slip deck Made from strong, virgin polyethylene Stainless steel mooring bush The Sealite Poseidon-1750 Buoy is manufactured from UV-stabilised virgin polyethylene and has been specifically designed to withstand the harsh marine environment, and operate reliably with minimal maintenance. Ports worldwide are realising the advantages of polyethylene buoys over traditional steel The colour pigment is added to the polyethylene during the moulding process, which means that the buoy never requires painting. The polyethylene material also inhibits marine growth, so the buoy requires cleaning less often than steel types. Significant advantages of the polyethylene buoy allow the interval between servicing to be far greater, and users continually report major cost savings. The Poseidon-1750 is constructed from 3 parts ensuring ease of deployment and servicing. Safe water mark, Australia Internet: www.sealiteusa.com Email: [email protected] Internet: www.sealite.com.au Email: [email protected]

stainless braces joining lifting eye. This ensures General Characteristics Available Colours Focal Plain Height (mm/inches) Total Float Volume (kgs/lbs) Nominal Freeboard (mm/inches) Nominal Draft (mm/inches) Reserve Buoyancy (kgs/lbs) Maximum Mooring Load (kg/lbs) Draft Maximum (mm/inches) Freeboard Minimum (kgs/lbs) Safe Working Load lpt (kgs/lbs) Safe Working Load 2pt (kgs/lbs) Submergence (kg/cm, lb/inch) Physical Characteristics Wall Thickness (mm/inches) Ballast (kg/lbs) Height (mm/inches) Width (mm/inches) Mass (kg/lbs) Product Life Expectancy Quality Assurance Intellectual Property Lantern...

Port Hand Starboard Preferred Hand Mark Channel to North Cardinal South Cardinal West Cardinal East Cardinal Port Hand Hand Mark Isolated Danger Safe Water The Sealite buoy division provides turn-key production of navigation buoys from tooling development, raw material selection and production, to final testing and inspection. Keeping this entire process in-house allows Sealite to guarantee the superior quality of it's products and ensures fast turnaround times. Each buoy product is rotationally-moulded from UV-stabilisedvirgin polyethylene, with individual components of Sealite's larger buoy...

in accordance with IALA recommendations, Sealite's range of Top Marks offer flexibility and maintenance, high visibility solution to marine navigation. on-site from UV-stabilised virgin polyethylene with a wall thickness of of IALA recommended colours and configurations to suit both IALA Regions With a 26mm (1 inch) Internal stainless- steel pole and industry standard 200mm OD mounting plate, Sealite's range of IALA Top Marks can be easily attached mounting stand lantern attachment) wall thickness Industry standard Part Number Port Hand Mark-1 red cylinder (IALA Region A) Port Hand Mark-1 green...