Catalogs >
SEAJET >
Seajet Pellerclean Brochure

Seajet Pellerclean Brochure
1 / 4Pages

Catalog excerpts

SEAJET ® PELLERCLEAN Seajet Pellerclean is a foul release propeller coating for propellers, stern gear, shafts, rudders and trim tabs. This foul release product is environmental friendly, biocide free and provides long term protection against fouling in both fresh and salt water environments. Seajet Pellerclean is suitable for motorboats and sailing yachts up to 30 knots. Suitable for DIY use as well as professional use.

Open the catalog to page 2

PROVEN PERFORMANCE Pellerclean consists of a two part primer for improving adhesion and a silicon topcoat to provide an ultra-slippery surface for releasing any attached fouling. After application any accumulated fouling normally washes off the non-stick, slippery surface when underway. For inactive boats, or those cruising below 5 knots, a quick wash or sponge off will remove any fouling and make the coating look like new again. Small kit, total content 315 ml • 1 x SEAJET PELLERCLEAN PRIMER BASE • 1 x SEAJET PELLERCLEAN PRIMER HARDENER • 1 x PELLERCLEAN CLEAR COAT Coverage • Quantity in...

Open the catalog to page 3

Seajet Pellerclean Primer Seajet Pellerclean Clear Coat Application guide video OFFERED BY THE WORLD LARGEST SILICONE PAINT PRODUCER FOR PROPELLERS AND STERN GEAR Seajet is part of Chugoku Paints B.V. Sluisweg 12, 4794 SW Heijningen, the Netherlands Tel. +31-167-526-100 SEAJETPAINT.COM

Open the catalog to page 4

Seajet Pellerclean Brochure 1 / 4Pages

Catalog excerpts

All SEAJET catalogs and brochures

Seajet Pellerclean Brochure
1 / 4Pages