SEAJET 122 BRILLIANCE TOPCOAT Product description Seajet 122 Brilliance Topcoat is a high performance one component topcoat which is easy to apply for a durable finish. Resistant to minor knocks. Colour Flash point Volume solids % VOC (Theoratical) Pack sizes Mixing ratio Product data Pure white, oyster white, mid blue, navy blue, red, cream and racing green 42°C 55 ±2 Thinner Application methods Conditions Spray details Spreading rate Recommended film thickness per coat Substrates Preceding coating Subsequent coating SEAJET THINNER U Brush, roller* Ambient temperature Max. humidity Product temperature Substrate temperature Nozzle tip Paint output pressure: Thinning: 15,7 Wet (pm) 64 Dry (pm) 35 For use over suitably primed GRP, wood, steel SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT SEAJET 122 BRILLIANCE TOPCOAT Mixing Before use, stir thoroughly until product is mixed to a uniform consistency. Notes *Film thickness and spreading rate depends on application method. Surface preparation Surface in poor condition: remove old paint layers by sanding or stripping. Existing paint in good condition or GRP: clean the surface. Wash down with fresh water and let it dry. Flatten back with P180-P280 abrasive paper. Clean the surface with a tack rag. SEAJET 122 BRILLIANCE TOPCOAT can be applied direct to fibreglass. Or, first apply SEAJET 012 Universal Primer/Undercoat to obtain an even colour. Apply a minimum of two coats of SEAJET 122 BRILLIANCE TOPCOAT. Sand between coats with P-400 or finer. Wood, steel and aluminum have to be primed with the appropriate primers. Product is developed for application by brush. Roller application is possible but the paint film has to be brushed out to a smooth finish using a soft, long haired, good quality brush. Avoid painting topcoats when damp or in direct sunlight. Dry mornings are best.

SEAJET 122 BRILLIANCE TOPCOAT Drying / overcoating data Notes: When overcoating intervals are exceeded, sand with wet or dry P320 abrasive paper. General information Storage Store the containers in a dry, cool and well ventilated space and away from direct sunlight. Containers must be kept firmly closed. Handle with care. Transportation The product should stay in a securely closed container during transport. Shelf life Min. 3 years @ 20°C Disposal Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Additional information More information...