SEAJET 117 MULTIPURPOSE EPOXY PRIMER Product description Seajet 117 Multipurpose Epoxy Primer is a two component primer, durable and protects your boat against osmosis with 4 roller coats. Suitable in combination with antifouling and two-component topcoats. An ideal first coat for GRP. Colour Flash point Volume solids % VOC (Theoratical) Pack sizes Mixing ratio Product data Silver grey (preferable underwater) and Off white (preferable above water) 32°C 50 ±2 Application details SEE ALSO SURFACE PREPARATION. ALL SEAJET ANTIFOULING. Add the hardener to the base whilst mixing. Stir well before use. Base: 68 Hardener: 32 (by volume) *Film thickness and spreading rate depends on application method Thinner Application methods Conditions Spray details Spreading rate Recommended film thickness per coat Substrates Preceding coating Subsequent coating Mixing Mixing ratio Notes SEAJET THINNER E Airless spray, brush, roller* Ambient temperature Max. humidity Product temperature Substrate temperature Nozzle tip Paint output pressure: Thinning: 10,0 Wet (pm) 100 Dry (pm) 50 GRP, wood, steel, aluminium. Surface preparation Degrease and clean using THINNER E wiping to remove all contamination. Bare fibreglass: Abrade using P80 abrasive paper followed by final cleaning. Apply 3-4 coats of SEAJET 117 to achieve the required minimum film thickness of 180 microns DFT. Bare aluminium: Abrade using P80 abrasive paper followed by final cleaning. Apply 3-4 coats of SEAJET 117 to achieve the required minimum film thickness of 180 microns DFT. Steel hulls and metal keels: Sand blast to SA 2/ or mechanical abrade bare areas. Apply 3-4 coats to achieve the required minimum film thickness of 180 microns DFT.

SEAJET 117 MULTIPURPOSE EPOXY PRIMER Drying / overcoating data Notes: * Mentioned maximum overcoat interval is for SEAJET Antifouling. - Maximum overcoat interval of SEAJET 117 with itself is free. Drying times and overcoating intervals will increase with increasing film thickness applied. General information Storage Store the containers in a dry, cool and well ventilated space and away from direct sunlight. Containers must be kept firmly closed. Handle with care. Transportation The product should stay in a securely closed container during transport. Shelf life Min. 3 years @ 20°C Disposal Do...