Seajet 012 Universal Primer Undercoat

Product catalog summary

Product Description: Seajet 012 Universal Primer is a primer and undercoat designed for one-component topcoats, suitable for use above the waterline. It is quick-drying and offers excellent adhesion to various surfaces and subsequent coats.

Specifications: The primer is available in pack sizes of 0.75lt and 2.5lt. It has a volume solids percentage of 50 ±2 and a VOC content of 396 g/l. The recommended film thickness per coat is 100 µm wet and 50 µm dry.

Application Details: The primer can be applied using airless spray, brush, or roller. The paint output pressure should be between 14.7 - 17.7 MPa, and thinning can be done with SEAJET THINNER U up to 7% by volume. The product should be applied at ambient, product, and substrate temperatures between 5°C and 35°C, with a maximum humidity of 85% R.H.

Surface Preparation: Surfaces should be degreased and cleaned. For paint in good condition, abrade with P100-P120 grade abrasive paper. Bare fiberglass should be abraded and cleaned, while steel hulls require sandblasting or hand sanding. Aluminum surfaces should receive a coat of SEAJET 017, and bare wood should be sanded and degreased before applying multiple coats of the primer.

Drying and Overcoating: Drying times vary with temperature, with surface dry times ranging from 45 minutes to 6 hours and hard dry times from 4 to 24 hours. Overcoating intervals also vary, with minimum times ranging from 16 to 48 hours and maximum times from 60 to 120 days.

Safety and Handling: Adequate ventilation is necessary, and contact with skin and inhalation of vapors should be avoided. The product is flammable, so it should be kept away from sparks and open flames. Containers should be stored in a dry, cool, and well-ventilated space, and disposal should be done at hazardous waste collection points.

Additional Information: The product has a shelf life of at least 3 years at 20°C. More information can be found on the manufacturer's website.

Catalog excerpts

SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT Product description Seajet 012 Universal Primer is a primer and undercoat for one component topcoats. Suitable for above the waterline only. Seajet 012 is quick drying and has an excellent adhesion to all surfaces and subsequent coats. Product data Colour Flash point Volume solids % Pack sizes Mixing ratio Application details Thinner Application methods Airless spray, brush, roller* Ambient temperature Product temperature Substrate temperature Paint output pressure: Spray details Spreading rate Recommended film thickness Wet (µm) 100 per coat Dry (µm) 50 Substrates For use over suitably primed GRP, wood, steel. Preceding coating Can be applied over aged coatings after sanding. SEAJET 017 on aluminium, SEAJET 117. Subsequent coating SEAJET 122 BRILLIANCE TOPCOAT. Before use, stir thoroughly until product is mixed to a uniform consistency. *Film thickness and spreading rate depends on application method. Values are based on roller application. Surface preparation Degrease and clean surface. For paint in good condition: abrade with P100-P120 grade abrasive paper first. Bare fibreglass: abrade using P100-P120 abrasive paper followed by final cleaning. Apply a single coat of SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT. Steel hulls: sand blast to SA 2½ or hand sanding with P100-P120. Apply 2 coats of SEAJET 117 followed by 2 coats of SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT. Aluminum: apply one coat of SEAJET 017 followed by 2 coats SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT, followed by the topcoat. Bare wood: sand with P100-P120 grade abrasive paper at 45° to the grain. Degrease using thinner wiping. Then apply 3-4 coats of SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT. After application of primer the topcoat can be applied.

Open the catalog to page 1

SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT Drying / overcoating data Notes: Drying times and overcoating intervals will increase with increasing film thickness applied. Before re-coating, always check that the existing paint film is 'through' dry. Store the containers in a dry, cool and well ventilated space and away from direct sunlight. Containers must be kept firmly closed. Handle with care. The product should stay in a securely closed container during transport. Shelf life Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Additional...

Open the catalog to page 2

All SEAJET catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list