Seajet Product Manual
21Pages

{{requestButtons}}

Catalog excerpts

Seajet Product Manual - 3

I WHEN PAINTING YOUR BOAT SEAJET is owned by Chugoku Marine Paints Ltd. (CMP); a Japanese company established in 1917 and listed on the Nikkei stock market index. CMP is one of the world's largest manufacturers and suppliers of coatings to commercial shipping and other areas of industry such as containers, industrial plants, steel structures, buildings and power stations. Being mindful of our environment and taking care to support health & safety regulations at all times, is a responsibility that SEAJET takes very seriously. SEAJET works together with the British Coatings Federation (BCF)...

Open the catalog to page 3
Seajet Product Manual - 4

PRODUCTS PRIMERS ANTIFOULING TOPCOATS VARNISH PROPELLER COATING THINNERS FOUL RELEASE COATING

Open the catalog to page 4
Seajet Product Manual - 5

Also refer to our painting guide and specifications later in this booklet.

Open the catalog to page 5
Seajet Product Manual - 6

Antifouling Type Self Polishing Product selector Slow Polishing Seajet 038 Taisho Slow Polishing • Test winning heritage. • Highly effective against slime. • Slow polishing antifouling. • Suitable for inland waterways. • High performance cruising antifouling. • Great value for money. • Good all-round performance. • Season long performance. • Slow polishing antifouling. Main benefits Number of coats per season Suitable for speed Suitable for aluminium Suitable for fibreglass wood and steel Suitable for fresh water Suitable for drying mud berths • Copper free antifouling, more...

Open the catalog to page 6
Seajet Product Manual - 7

Topcoats Varnish Type Recommended for Main benefits Durability against abrasion Gloss retention (resistance to UV sunlight) Easy of achieving a “mirror finish” when applied by hand Application direct to fibreglass Application over existing similar coatings Interior use Use as a deck coating Colours Coverage Rate when brushed Pack size Key: ^3 Suitable 33

Open the catalog to page 7
Seajet Product Manual - 8

Propeller coating Thinners Type 1 Slime may need to be removed by gentle sponge cleaning or low pressure washing. Product selector Seajet Thinners for 1-component paint Seajet Thinners for 2-component paint Main benefits Pack size Thinner U for Seajet 122 Brilliance, Seajet 012 Universal Primer and Seajet 120 UV Varnish. Thinner A for Seajet Antifouling Seajet Speed and Seajet 011 Underwater Primer. Cleaning brushes and spray equipment. Thinning for easier application. Very suitable Thinner E for all Seajet Epoxy Primers. Thinner P for Seajet 132 Polyurethane. Cleaning brushes and spray...

Open the catalog to page 8
Seajet Product Manual - 10

YOUR SAFETY Your safety is our top priority, so please follow our guidance below to prevent accidents. Protect yourself using the right equipment to avoid skin or eye contact. Good Practice • Always read the health and safety advice on our labels and data sheets. • Avoid solvents on your skin. Solvent wiping will degrease your skin and can lead to dermatitis. In case of fire, use a CO2 extinguisher or sand. Water will spread the solvent and the fire. • Always work in ventilated areas. Allow plenty of airflow when painting as the build up of solvent can cause sleepiness and nausea. Wear a...

Open the catalog to page 10
Seajet Product Manual - 11

Antifouling Compatibility table Existing product Jotun Megayacht Imperial Antifouling Compatibility table Existing product - Apply antifouling after removing slime or fouling with high pressure fresh water, remove loose antifouling and spot repair with the recommended primer. - As above but light wet-sanding of the existing antifouling is required, then rewash before painting. - As above but apply a barrier coat of Seajet 011 Underwater Primer before applying the new coating. - Remove the existing antifouling and apply the recommended primer system before applying antifouling. Don't take

Open the catalog to page 11
Seajet Product Manual - 12

I SURFACE PREPARATION Bare substrates: GRP Degrease with thinner. Sand the surface using 80180 grit paper. Remove all dust with fresh water and allow to dry completely. Follow the paint specifications provided in this brochure. Aluminium Degrease with thinner. Sand the surface using 100 grit paper suitable for aluminium. Clean thoroughly to remove all residue and allow to dry. Immediately apply the first coat of Seajet primer. Follow the paint specifications provided in this brochure. Wood Degrease with thinner. Abrade in the direction of the grain with 180 grit paper, followed by 280 grit...

Open the catalog to page 12
Seajet Product Manual - 13

PAINTING ABOVE THE WATERLINE Topcoats Most topcoats are compatible. Remember that Seajet topcoats can be applied directly to existing Remove any old varnish layers in poor condition the first coat by 50% on bare wood. Thin the se- a 1-component topcoat can be applied over a paint or fibre glass. First rubdown to remove any by sanding. To improve adhesion to the wood, de- cond coat by 25%, the third by 10% and then apply imperfections using 280 then 320 abrasive paper. grease oily woods like pine, by wiping with SEAJET additional coats, thinning if necessary by 5%. Apply However to obtain a...

Open the catalog to page 13
Seajet Product Manual - 14

POLYESTER WOOD ALUMINIUM STEEL PROPELLERS KEELS

Open the catalog to page 14
Seajet Product Manual - 15

ANTIFOULING BELOW WATER SYSTEM Seajet Antifouling (2-3 coats) Below schemes are recommended for bare substrates. For existing antifouling, please check the compatibility chart (page 22). If compatible, apply the antifouling directly on top. In other cases use Seajet 015 Seajet 117 Primer silver grey (4-5 coats) Seajet Antifouling (2-3 coats) barrier coat and consult the TDS. Use the recommended primer for spot repair and always apply an extra coat on the waterline and leading edges. Seajet 117 Primer silver grey (2 coats) When a paint system is in bad condition, always remove it. Excessive...

Open the catalog to page 15
Seajet Product Manual - 16

TOPCOATS ABOVE WATER SYSTEM Below schemes are recommended for bare substrates. ONE COMPONENT SYSTEM Seajet 122 Brilliance (2-3 coats) Seajet 122 Brilliance (2-3 coats) Seajet 012 Primer (2 coats) Seajet 122 Brilliance (2-3 coats) Seajet 017 Primer (1 coat) Seajet 012 Primer (1 coat) Seajet 117 Primer off-white (3 coats) Seajet 012 Primer (1 coat) Seajet 122 Brilliance (2-3 coats) EXISTING TOPCOAT Seajet 122 Brilliance (2-3 coats) Seajet 012 Primer (3 coats) Seajet 132 Topcoat (2-3 coats) Seajet 117 off-white (2 coats) EXISTING TOPCOAT Seajet 132 Topcoat (2-3 coats) Seajet 117 Primer...

Open the catalog to page 16

All Seajet Yacht Paint catalogs and brochures

Archived catalogs