Seajet Product Guide
13Pages

PRODUCT GUIDE

INTRODUCTION SEAJET SEAJET is a yacht paint brand of Chugoku Marine Paints Ltd. Often referred to as CMP, we are one of the world’s largest manufacturers of marine paints to the commercial shipping industry and a recognized leader per-free antifouling (038 Taisho by Seajet Yacht in the development of antifouling technology. CMP manufactures and distributes worldwide to meet the Paint) is performing really well. After months in needs of customers globally. the tropical waters of Cabo Verde and Brazil, our underwater inspection showed almost no bar- SEAJET is headquartered in The Netherlands...

Product selector One component for easy application Seajet 015 Seajet 012 Underwater Primer Universal Primer - Undercoat Two component for high performance results Seajet 117 Multipurpose Epoxy Primer Where can I use this primer? Main benefits Most suitable for fibreglass Most suitable for wood Most suitable for aluminium Most suitable for steel Most suitable for osmosis prevention Most suitable for cast iron, steel or lead keels Colours Coverage rate when rolling Pack size Underwater only Binder coat for old or unknown antifouling and Teflon. Primer for antifouling. Quick drying. Excellent...

Antifouling Type Super self-polishing Number of coats per season Suitable for speed Suitable for aluminium Suitable for fibreglass wood and steel Suitable for fresh water Suitable for drying mud berths Colours Coverage rate Pack size Key: Slow polishing • Test winning heritage. • Highly effective against slime. • Slow polishing antifouling. • Suitable for inland waterways. • High performance cruising antifouling. • Great value for money. • Good all-round performance. • Season long performance. • Slow polishing antifouling. white, navy blue, black white, mid blue, navy blue, mid blue, navy...

Antifouling Type Self Polishing Seajet 039 Platinum 2-pack & mono component Product selector • Ultimate performance antifouling for the highest fouling areas. • Super self-polishing. • Ideal for blue water cruisers. • Advanced Self Polishing Copolymer (SPC) antifouling. Number of coats per season • Copper-free antifouling, for all types of waters. • Suitable for aluminium. • Bright colours including bright white. • Proven uplift in fouling protection. • Minimum build up of paint. • Test winning heritage. • For the highest fouling areas (warm and cold). Suitable for fresh water Suitable for...

* Apply 1 extra coat on the waterline and leading edges for one season. ** For practical coverage, please use the paint calculator on the website or Seajet app.

Topcoats Varnish Type Product selector Main benefits Durability against abrasion Gloss retention (resistance to UV sunlight) Easy of achieving a “mirror finish” when applied by hand Application direct to fibreglass Application over existing similar coatings Interior use Use as a deck coating Colours Coverage rate when brushed Pack size One component for easy application Two component for high performance Seajet 130 Polyurethane Gloss Varnish

1 Slime may need to be removed by gentle sponge cleaning or low pressure washing. Use biocides safely. Always read the label and product information before use. ISEAJET PELLERCLEAN Seajet Pellerclean is foul release propeller coating for propellers, stern gear, shafts, rudders and trim tabs. This foul release product is environmental friendly, biocide free and provides long term protection against fouling in both fresh and salt water environments. Seajet Pellerclean is suitable for motorboats and sailing yachts up to 30 knots. Pellerclean consists of a two part primer for improving adhesion...

When the paint job is finished, dispose of the waste correctly and do not drive your car with opened drums in the back.

Antifouling Compatibility table ■ - Apply antifouling after removing slime or fouling with high pressure fresh water, remove loose antifouling and spot repair with the recommended primer. ■ - As above but light wet-sanding of the existing antifouling is required, then rewash before painting. | - As above but apply a barrier coat of Seajet 015 Underwater Primer before applying the new coating. - Remove the existing antifouling and apply the recommended primer system before applying antifouling.

SEAJET COLOUR CHART SEAJET 031 SAMURAI navy blue shark grey dark grey navy blue Although every effort is made to get the colours as accurate as possible, this should be used as a guide only. Test an area first. The colour will look different in the water. The manufacturer cannot be responsible for slight deviations. dark grey navy blue navy blue navy blue SEAJET 027 SAIKO / SEAJET 040 SHOSHA / SEAJET 038 TAISHO navy blue dark grey navy blue greenish grey (mono) graphite grey (mono)

© Copyright 2023 Seajet. All Rights Reserved.