Seajet 130 Polyurethane Gloss Varnish
2Pages

SEAJET 130 POLYURETHANE GLOSS VARNISH Product description Seajet 130 Polyurethane Gloss Varnish is a beautiful, high gloss traditional varnish. This two component varnish provides high UV protection, is resistant to abrasion, loss of gloss and chemicals. Colour Flash point Volume solids % VOC (Theoratical) Pack sizes Mixing ratio Spreading rate Recommended film thickness per coat Substrates Preceding coating Subsequent coating Thinner Application methods Conditions SEAJET THINNER P Airspray, brush, roller* Ambient temperature Max. humidity Product temperature Substrate temperature Nozzle tip Paint output pressure: Thinning: 16,7 Wet (pm) 60 Dry (pm) 30 Wood SEAJET 130 POLYURETHANE GLOSS VARNISH Mixing Mixing ratio Notes Add the hardener to the base whilst mixing. Stir well before use. Base: 67 Hardener: 33 (by volume) * In case of brush or roller application more layers may be required to achieve the specified film thickness. The amount of thinner to be added depends on temperature of the paint and the substrate to be painted. Application by a short hair mohair or foam roller suited for polyurethanes, followed by brushing out to a smooth paint film with a soft long haired, good quality brush gives the best possible results. Surface preparation Surface in poor condition: remove old varnish layers by sanding or stripping. Existing two-component varnish in good condition: clean the surface. Flatten back with P60-80 abrasive paper along the grain. Then sand with abrasive paper for P100-220. Clean the surface with a tack rag. Apply a minimum of five coats of SEAJET 130 Polyurethane Gloss Varnish. Add 10-15% thinner for the first two coats. Then reduce thinning to 0-10% for further coats. Sand between coats with P280-P400 for a better finish. Clean the surface with a tack rag. Apply with a good quality bristle brush. Avoid painting varnish when damp or in direct sunlight. Dry mornings are best to paint. Mix thoroughly and stir well before use.

SEAJET 130 POLYURETHANE GLOSS VARNISH Drying / overcoating data Notes: * After 48 hours light sanding with abrasive paper P360 is recommended. General information Storage Store the containers in a dry, cool and well ventilated space and away from direct sunlight. Containers must be kept firmly closed. Handle with care. Transportation The product should stay in a securely closed container during transport. Shelf life Min. 3 years @ 20°C Disposal Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Additional information More...