Seajet 120 UV Varnish
2Pages

SEAJET 120 UV VARNISH Product description Seajet 120 UV Varnish is a beautiful, high gloss traditional tung oil varnish. This one component varnish contains UV absorbers to provide longer life and is easy to apply. Colour Flash point Volume solids % VOC (Theoratical) Pack sizes Mixing ratio Spreading rate Recommended film thickness per coat Substrates Preceding coating Subsequent coating Thinner Application methods Conditions SEAJET THINNER U Air spray, brush, roller* Ambient temperature Max. humidity Product temperature Substrate temperature Nozzle tip Paint output pressure: Thinning: 14,8 Wet (pm) 68 Dry (pm) 40 Wood SEAJET 120 UV VARNISH min. 5°C - max. 35°C 80% R.H. min. 5°C - max. 35°C min. 7°C - max. 35°C 1,2-1,5 mm 2 - 3 bar 0 - 5% (by brush) or 10 - 15% by spray. m2/l (theoretical) Mixing Before use, stir thoroughly until product is mixed to a uniform consistency. Notes *Film thickness and spreading rate depends on application method. Surface preparation Existing varnish in good condition: clean the surface. Wash down with fresh water and let it dry. Flatten back with P280-P400 abrasive paper. Clean the surface with a tack rag. Apply 2 coats or more. Surface in poor condition: remove old varnish layers by sanding or stripping. Bare wood: sand the surface with P80-P180 along the grain, followed by P280-P400. Remove all dust by thinner wiping and allow to completely dry. Application: thin the first coat by 50% on bare wood. Thin the second coat by 25%, the third coat by 10% and then apply additional coats, thinning if necessary by 5%. You can apply 5-6 additional coats for a glass like finish. Wet sand along the grain between coats with P320-P400 for a better finish. Avoid painting varnish when windy, damp or in direct sunlight. Dry mornings are best to paint.

SEAJET 120 UV VARNISH Drying / overcoating data General information Storage Store the containers in a dry, cool and well ventilated space and away from direct sunlight. Containers must be kept firmly closed. Handle with care. Transportation The product should stay in a securely closed container during transport. Shelf life Min. 3 years @ 20°C Disposal Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Additional information More information can be found on www.seajetpaint.com. Safety information Personal Protection advice and...