Seajet 015 Underwater Primer
2Pages

SEAJET 015 UNDERWATER PRIMER Product description Seajet 015 Underwater Primer is based on a special acrylic resin and works as an excellent sealer/barrier coat over unknown, incompatible and Teflon based antifouling. It is quick drying and adheres excellent to subsequent coats. Colour Flash point Volume solids % VOC (Theoratical) Pack sizes Mixing ratio Thinner Application methods Conditions Spray details Spreading rate Recommended film thickness per coat Substrates Preceding coating Subsequent coating SEAJET THINNER A Airless spray, brush, roller* Ambient temperature Max. humidity Product temperature Substrate temperature Nozzle tip Paint output pressure: Thinning: 7,5 Wet (pm) 133 Dry (pm) 40 GRP, wood, steel. ALL SEAJET ANTIFOULING Mixing Before use, stir thoroughly until product is mixed to a uniform consistency. Notes *Film thickness and spreading rate depends on application method. Surface preparation Over existing clean antifouling: roughen the surface with abrasive paper P100-120 grade (wet sanding). Apply 1 coat of SEAJET 015 UNDERWATER PRIMER to assure good adhesion with subsequent SEAJET Antifouling. Consult SEAJET Antifouling compatibility Chart. Only apply to dry, damp-free surfaces. Bare fibreglass: degrease and abrade with P100-120 grade abrasive paper, followed by THINNER E wiping to remove all contamination from the surface. Apply 1 coat of SEAJET 015 UNDERWATER PRIMER followed by SEAJET Antifouling. Wood and steel: degrease if required and abrade followed by final cleaning to remove all contamination from the surface. Apply 3-4 coats of SEAJET 015 UNDERWATER PRIMER followed by SEAJET Antifouling. Aluminium: as for steel but apply SEAJET 017 Epoxy Bonding Primer as first coat.

SEAJET 015 UNDERWATER PRIMER Drying / overcoating data Notes: * Maximum with antifouling Drying times and overcoating intervals will increase with increasing film thickness applied. Before re-coating, always check that the existing paint film is 'through' dry. General information Storage Store the containers in a dry, cool and well ventilated space and away from direct sunlight. Containers must be kept firmly closed. Handle with care. Transportation The product should stay in a securely closed container during transport. Shelf life Min. 3 years @ 20°C Disposal Do not empty into drains,...