www.seaflomarinerv.com Email: [email protected] www.seaflomarinerv.com Email: [email protected] Alarm Control System FEATURES & BENEFITS Detects water and sends a signal (3 seconds delay) to the alarm and switch Switch activates the Bilge Pump at a 41mm/1.6" fluid level and deactivates at a 9.5mm/0.37" fluid level 3 second delay prevents false starts Totally sealed fluid detector is never in contact with water, will not corrode and is not affected by oil or debris Model Number Alarm volume Wire Gauge Size /length Water Level Alarm System FEATURES & BENEFITS Consists of an electric field bilge switch and a 95 dB alarm Detects water and sends a signal (3 seconds delay) to the alarm Switch activates the Bilge Pump at a 41mm/1.6" fluid level and deactivates at a 9.5mm/0.37" fluid level 3 second delay prevents false starts Precision switch automatically activates and shuts off alarms when water reaches specific levels No moving parts, totally sealed solid state electronics and field detectors Electric Field Bilge Switch 06 Series This SEAFLO electric field sensor senses water level and automatically controls a 12 or 24 volt bilge pump. The switch turns on when it senses 41mm (1.6") water level and turns off when water is below 9.5mm (0.37"). This product is designed for use in pleasure boat applications, and is not intended to be used in commercial marine & Model Number Alarm volume Wire Gauge Size /length FEATURES & BENEFITS boating applications or for any other use. Ideal for use with electric bilge pump Rated to handle pumps up to 20A at 12V or 10A at 24V No moving parts, totally sealed solid state electronics and field detectors No exposed sensors eliminate corrosion possibilities Using Switch Base Using Mounting Ears High Water Bilge Alarm FEATURES & BENEFITS Activates at a 41mm (1.6") fluid level and deactivates at a 9.5 mm (0.37") fluid level A safety reminder device integrating vision and hearing Consists of a float switch and a 95 DB alarm Allows an unarmed compartment to be constantly monitored Turn on when water level higher than 45-55mm(1.77"-1.97") Turn off when water level lower than 20-25mm(0.79"-0.98") The float switch comes with a filter housing to keep debris out A three second delay prevents false starts from water sloshing in the bilge Easy to install, mounted on either horizontal or vertical surface (e.g. bulkhead or hull) INSTALLATION DIMENSION DRAWING Testing Switch Model Number Alarm volume Wire Gauge Size /length Alarm Switch Panel Water Alarm FEATURES & BENEFITS SEAFLO Float Switch A safety reminder device integrating vision and hearing Allows an unarmed compartment to be constantly monitored For use with seaflo electric field bilge switch,precise operation ensures proper bilge pumping and provides peace of mind Controls any pump equipped with an automatic float switch Unique 3-way switch disables piezo alarm while keeping warning LED lit Marine switch panel,easy to install SEAFLO Submersible Bilge Pump Model Number Wire Gauge Size /length Alarm volume Model Number Wire Gauge Size /length Model Number Wire Gauge Size /length Alarm volume