Catalog excerpts
pb^`lk (europe) LTD TEST FACILITY pb^`lk (europe) Ltd Test Facility DESCRIPTION With an increase in the demand for customers to utilise our in-house testing facility, the following document compiles a list of testing that we can perform at pb^`lk (europe) Limited which can be utilised by a third party on a daily or part daily basis with full technical assistance as back up if required. KEY FEATURES · Hydrostatic pressure tests up to 10,000 psi · Hydrostatic cycling on all pressure vessels · Most test regimes catered for · Competitive hourly or daily rates · Full quotations available on request · Full test report writing service MECHANICAL · Due to the precision tolerances required to ensure reliable connector operation, pb^`lk (europe) Ltd employs a wide and varied array of mechanical inspection equipment including:Brown & Sharp 2D Digital Height Gauge Brown & Sharp Shadowgraph/Profile Projector Digital Surface Finish Gauge In addition to this a varied selection of Micrometers, Bore Micrometers, Digital Vernier Callipers and Thread Gauges are also available. pb^`lk (europe) Ltd Seacon House, Hewett Road, Gapton Hall Industrial Estate, Great Yarmouth, NR31 0RB, United Kingdom TEL: +44 (0) 1493 652733 FAX: +44 (0) 1493 652840 E-Mail: info@seaconeurope.com Website: www.seaconeurope.com
Open the catalog to page 1
ELECTRICAL/ ELECTRONIC As a connector manufacturing company the electrical reliability of our connectors is paramount and to ensure this pb^`lk (europe) Ltd operates a large array of multimeters and insulation resistance testers (operating from 50 VDC to 5000 VDC). Also used are high accuracy 4-wire ohmmeters, Oscilloscope, PSU's and an RCL meter operating from 50Hz to 100KHz. HYDROSTATIC Most of the pressure testing required by SCE is performed in our own facility located onsite with a total of three pressure vessels. The first of these operates in the 0-2,000 psi range and operates...
Open the catalog to page 2
molar`q==a^q^pebbq Our second and third vessels operate at upto 10,000 psi and both have an internal diameter of 4 inches. One unit has a depth of 7 inches while the second has a depth of 36 inches, as with the through lid testing facility as described before. Note we can offer pressure cycling manually or automatically on all pressure vessels. Automatic pressure cycling unit complete with chart recorder In addition to this we have various jigs and fixtures for pressure testing specific assemblies and also helium/nitrogen leak testing. QUALITY · pb^`lk (europe) Ltd operate a Quality...
Open the catalog to page 3All SEACON (Europe) catalogs and brochures
-
CS-MS Catalog Section - Rev IX11 Pages
-
GRE23 Pages
-
RUBBER-MOLDED_lres139 Pages
-
SAPL-DS-0110 MSSQ FCR Rev 32 Pages
-
SUTA2 Pages
-
MSSQ RUFF-NEK2 Pages
-
DS-05002 Pages
-
DS-04122 Pages
-
DS-04102 Pages
-
DS-04022 Pages
-
DS-04013 Pages
-
DS-03701 Pages
-
DS-01832 Pages
-
DS-01802 Pages
-
DS-01202 Pages
-
DS-01003 Pages
-
DS-00904 Pages
-
DS-00804 Pages
-
DS-00632 Pages
-
DS-00624 Pages
-
DS-00614 Pages
-
DS-00402 Pages
-
DS-00301 Pages
-
DS-00183 Pages
-
DS-00163 Pages
-
SEACON PRODUCTS 2015/168 Pages
-
SAPL-DS-0107 ATA Rev 42 Pages
-
SAPL-DS-0108 FITA Rev 32 Pages
-
SAPL-DS-0109 RA FCR Rev 22 Pages
-
SCE-DS-0002 PEEK 55 Rev 44 Pages
-
SCE-DS-0006 MSS Rev 26 Pages
-
SCE-DS-0009 VITON Rev 33 Pages
-
SAPL-DS-0020 Limit Switches2 Pages
-
SAPL-DS-0121 Oil Filled Hose2 Pages
-
SAPL-DS-0006 MICROSTAR2 Pages
-
FIBER-OPTICS_Rev-VII_lres133 Pages
-
GLOBE-CON_Rev-II_lres18 Pages
-
MSS_Rev-VIII_lres121 Pages
-
U-MATE_Rev-I_lres111 Pages
-
ALL-WET_Rev-VII_lres129 Pages
-
SEA-MATE_Rev-III_lres220 Pages
-
SAPL-DS-0002-S-Series-S1-2 Pages
-
SPECIALTY-PRODUCTS_lres23 Pages
-
SWITCHES_lres114 Pages
-
FIELD-INSTALLABLE_lres120 Pages
