Website:
SEACON (Europe)
Group: TE Connectivity
Catalog excerpts
PRESSURE BALANCED OIL-FILLED (PBOF) HOSE ENGINEERED SUBSEA FIBER OPTIC & ELECTRICAL PBOF HOSE CONDUIT DESCRIPTION Subsea jumper assemblies and distribution harnesses are provided by Precision Subsea for use with subsea connectors. Many subsea electrical and optical cable and connection systems utilize Pressure Balanced Oil Filled (PBOF) cabling solutions. These cables utilize an elastomeric hose as a conduit for electric wires and fiber optic lines. The elastomeric conduit is filled with a compensating fluid, allowing the sea water pressure to freely communicate with the interior oil volume and equalizing the pressure in the assembly. This option for cabling provides for a reliable and configurable cable system suitable for many subsea applications. This technology has been widely utilized in ocean science observatories, towed arrays, drilling systems, production control systems and Remotely Operated Vehicle (ROV) systems. Precision Subsea is pleased to offer this solution for any configuration of subsea cable network. Temperature and pressure compensated Design Life: >25 years in operation subsea Volume compensation capacity >12% Designed for ROV handling Single or double o-ring sealing Metal to metal sealing Medium voltage design 12mm bore capacity Integrated longitudinal strain relief. Break >20,000N Full torsion flexibility Swivel Nut. Serrated for easy handling Titanium GR2 and 316L Stainless Steel as an option Anti-rotation crimp sleeve system MKII compatible through out Crimp sleeve electrically connected Rubber fitting protector QUALITY · pb^`lk Advanced Products, LLC operate a Quality Management System certified to ISO 9001:2008. pb^`lk Advanced Products, LLC. April 2011 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com SAPL-DS-0121 OIL FILLED HOSE Rev 1 Page 1 of 2
Open the catalog to page 1
molar`q==a^q^pebbq SPECIFICATIONS Dimensions ID: 13mm and 20mm Dimensions OD: 25mm and 32mm Wall Thickness: Nominal 6mm Material: Rubber, SBR, NBR or equivalent Outside Colour: Orange Design: Two layer with tension and pressure armor in between · Volumetric Expansion: >12% nominally · Elongation: <2% at 2500 N tension · · · · · · Break Load by Tension: >10,000 N (at end terminations) Pressure Rating: WP 10 bar. Burst pressure >40 bar Minimum Bend Radius: 125mm Lifetime Subsea: >25 years Working Temperature: -5 to +40ºC Storage Temperature: -25 to +50ºC Ozone Resistance: Two months outside...
Open the catalog to page 2All SEACON (Europe) catalogs and brochures
-
CS-MS Catalog Section - Rev IX11 Pages
-
GRE23 Pages
-
RUBBER-MOLDED_lres139 Pages
-
SAPL-DS-0110 MSSQ FCR Rev 32 Pages
-
SUTA2 Pages
-
MSSQ RUFF-NEK2 Pages
-
DS-05002 Pages
-
DS-04122 Pages
-
DS-04102 Pages
-
DS-04022 Pages
-
DS-04013 Pages
-
DS-03701 Pages
-
DS-01832 Pages
-
DS-01802 Pages
-
DS-01202 Pages
-
DS-01003 Pages
-
DS-00904 Pages
-
DS-00804 Pages
-
DS-00632 Pages
-
DS-00624 Pages
-
DS-00614 Pages
-
DS-00402 Pages
-
DS-00301 Pages
-
DS-00183 Pages
-
DS-00163 Pages
-
SEACON PRODUCTS 2015/168 Pages
-
SAPL-DS-0107 ATA Rev 42 Pages
-
SAPL-DS-0108 FITA Rev 32 Pages
-
SAPL-DS-0109 RA FCR Rev 22 Pages
-
SCE-DS-0002 PEEK 55 Rev 44 Pages
-
SCE-DS-0006 MSS Rev 26 Pages
-
SCE-DS-0009 VITON Rev 33 Pages
-
SAPL-DS-0020 Limit Switches2 Pages
-
SAPL-DS-0006 MICROSTAR2 Pages
-
FIBER-OPTICS_Rev-VII_lres133 Pages
-
GLOBE-CON_Rev-II_lres18 Pages
-
MSS_Rev-VIII_lres121 Pages
-
U-MATE_Rev-I_lres111 Pages
-
ALL-WET_Rev-VII_lres129 Pages
-
SEA-MATE_Rev-III_lres220 Pages
-
SAPL-DS-0002-S-Series-S1-2 Pages
-
SPECIALTY-PRODUCTS_lres23 Pages
-
SWITCHES_lres114 Pages
-
FIELD-INSTALLABLE_lres120 Pages
