Catalogs >
SEACON (Europe) >
SAPL-DS-0113 SBP Series FITA Rev 3

SAPL-DS-0113 SBP Series FITA Rev 3
2Pages

Catalog excerpts

POSITIVELY PRESSURIZED, DEEPWATER MUX CABLE CONNECTOR WITH INTEGRAL ARMOR TERMINATION ASSEMBLY DESCRIPTION The p_m pÉêáÉë connector is a MUX cable termination that maintains a constant positive pressure inside its oil-filled chambers. Positive pressure maintained via spring loaded pistons, deters water ingress from conductor interstices and other sources. Inside the connector advanced conductor boot sealing technology assures functionality even if the p_m pÉêáÉë connector is water-flooded. The p_m pÉêáÉë connector is field installable and testable. Dual barrier seals are used throughout the connector. It is currently available in an electro-optical hybrid configuration designed for both single-mode (SM) and multi-mode (MM) optical communications. Overall length: 28.2" Overall Diameter: 8" Test port for mated connector condition Operational Depth Rating: 5,300 psi (12,000 ft) · Modular cable terminations and Field Installable (no compounds) · Dual Pressure Compensated Chambers · Rear Chamber: Up to approx. 60 psi · Front Chamber: Up to approx. 35 psi · Integral Cable Armor Termination DESIGN RATINGS · · · · Design Life: 20 years Qualification Test Pressure: 6,500 psi (14,500 ft) Design Pressure: 8,000 psi (17,900 ft) Secondary seals on contacts allow for operation even if water flooded · Conductor Insulation Resistance: 1.0 Gohm @ 1,000 VDC · Cable Working Load: 6,000lb · Qualified by test including long term (3 months) at design pressure in fully water flooded condition (refer to qualification test report SAPL-ENG-1066) pb^`lk Advanced Products, LLC. March 2012 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com SAPL-DS-0113 p_m pbofbp cfq^ Rev 3 Page 1 of 2

Open the catalog to page 1

a^q^pebbq MATERIALS · 316 SST, 15-5 PH SST, 17-4 PH SST, Titanium Grade 5 · Electrical inserts: Glass Reinforced Epoxy · Optical Contacts: Dual O-Ring · Elastomer: Neoprene, Nitrile, Hypalon · Compensation Fluid: DC710 non conductive silicone oil PRINCIPLE OF OPERATION The SBP Series Connector was designed to be an integral part of the MUX umbilical cable termination system. The 6,000lb Armor Termination is integral to the connector body allowing the tensioned cable loads to be carried through the connection interface. The SBP connector is a flange mounted configuration allowing for good...

Open the catalog to page 2

SAPL-DS-0113 SBP Series FITA Rev 3 2Pages

Catalog excerpts

All SEACON (Europe) catalogs and brochures

SAPL-DS-0113 SBP Series FITA Rev 3
2Pages