Catalogs >
SEACON (Europe) >
SAPL-DS-0108 FITA Rev 3

SAPL-DS-0108 FITA Rev 3
2Pages

Catalog excerpts

cfbia=fkpq^ii^_ib=C=qbpq^_ib=^ppbj_iv=Ecfq^F = = = = = POSITIVELY COMPENSATED (60 PSI OVER AMBIENT), DEEPWATER MUX CABLE CONNECTOR cfq^ terminated to electrical MUX cable DESCRIPTION The cfq^ connector is an electrical termination that maintains a constant positive pressure inside the oil-filled connector cavity. Positive pressure, maintained at 60 psi using a spring-loaded piston, deters water ingress from conductor interstices and other sources. Inside the connector, advanced conductor booting technology assures functionality even when the cfq^ is water-flooded. The cfq^ is field installable and testable. Dual barrier seals are used throughout the connector. Overall Length: 21" Overall Diameter: 4.2" Pressure Compensated Chambers Megger Test Pin allows testing for water-flooding while mated · Depth Rating: 10,000 ft. · Voltage: 600 V / Current: 15 A · 12#16 Electrical Contacts, new version to include fiber optic contacts · Modular cable terminations and Field Installable (no compounds) DESIGN RATINGS & TESTING · Design life: 20 years · Qualification tested to 7,500 psi. Design pressure: 20,000 psi. · Secondary seals on electrical contacts allow for operation even water flooded · Test ports for O-rings · Connector Insulation Resistance: >100 Megohms @ 500 VDC · Cable Pullout Load: 700 lbs. · Qualification tested in ice bath, chamber water-filled, then oil-filled pb^`lk Advanced Products, LLC. May 2011 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com

Open the catalog to page 1

molar`q==a^q^pebbq MATERIALS · 15-5 PH SST, 316 SST, 17-4 PH SST, CA360 · Electrical Insert: Glass Re-enforced Epoxy · Elastomer: Neoprene, Nitrile PRINCIPLE OF OPERATION The cfq^ was designed to be an integral part of the MUX umbilical cable termination system shown below. The ^êãçê qÉêãáå~íáçå=^ëëÉãÄäó is secured to the riser or control system framework using a _êÉ~â~ï~ó=råáí that is designed to separate at a defined load. The smaller, more manageable cfq^ is then routed and connected. In the case of accidental BOP droppage, the _êÉ~â~ï~ó=råáí=shears and the unarmored section of cable...

Open the catalog to page 2

SAPL-DS-0108 FITA Rev 3 2Pages

Catalog excerpts

All SEACON (Europe) catalogs and brochures

SAPL-DS-0108 FITA Rev 3
2Pages