MINI-CON / Micro MINI-CON Catalog Section - Rev XIII
28Pages

UNDERWATER ELECTRICAL DRY-MATE CONNECTORS

CONTENTS PAGE

MINI-CON SERIES UNDERWATER ELECTRICAL DRY-MATE CONNECTORS INTRODUCTION SEACON's well established MINI-CON range was originally developed for the purpose of supplying small diameter, high density and high pressure connectors. Dry mateable, this connector series is manufactured from 316 Stainless Steel as standard, although other materials are available upon request including Titanium and Monel™. The inserts are manufactured from Glass Reinforced Epoxy (GRE) with copper alloy, gold plated contacts although glass sealed inserts are also available for high pressure applications. The MINI-CON...

MINI-CON SERIES UNDERWATER ELECTRICAL DRY-MATE CONNECTORS GENERAL INFORMATION REVERSED MINI-CON CONNECTORS (V-MIN) The "V" before the MIN prefix in the Part Numbering System (see page 3) represents a reversed miniature insert. Many of our bulkhead connectors are available with sockets instead of pins and the corresponding cable plugs have pins instead of sockets. Reversed MINI-CON's are an option for applications that require design of cabling/harnessing systems to be electrically sound with respect to "power on" safety requirements. NOTE: Reversal of sockets and pins may not be required...

MINI-CON SERIES UNDERWATER ELECTRICAL DRY-MATE CONNECTORS HIGH PRESSURE CONNECTORS The MINI-CON series can be manufactured with Titanium or high strength material shells which will increase the mated pressure rating to 20,000 psi mated. For high open face pressure ratings, most MINI-CON bulkhead connectors can be manufactured with a Glass Sealed Contact Insert Receptacle (CIR). These inserts consist of gold plated pins, compression glass sealed in a type 316 Stainless Steel contact web. Our standard glass sealed MINI-CON's are rated at 10,000 psi, open face, or greater depending on the...

UNDERWATER ELECTRICAL DRY-MATE CONNECTORS jfkfJ`lk SERIES EXPLODED VIEW ` BULKHEAD NUT jfkfJ`lk SERIES ` MIN-BCR jfkfJ`lk Bulkhead Connector Receptacle BCR FACE SEAL O-RING INTERNAL O-RING INTERNAL O-RING RETAINING RING ENGAGING NUT WASHER ENGAGING NUT WASHER SPIROLOX jfkfJ`lk SERIES ` MIN-CCP jfkfJ`lk Cable Connector Plug

MINI-CON SERIES DIMENSION DETAILS MINI-CON Bulkhead Connector Receptacle Mates with MIN-CCP Dummy Connector: MIN-DSP 1.75 REC 2.12 LONG NOTES: ■ Torque specified is for dry metal threads. ■ For contact configurations please refer to pages 16-20. ■ When ordering MIN-BCR you receive: 2, 3, 4, 5, 6, 7. Please refer to the MINI-CON master parts and materials list on page 15. ■ Nut and washer are optional. ■ Bore must be perpendicular to spot face. ■ Spotface diameter to be equal or greater than the connector diameter. ■ If threaded mount is used, lead thread chamfer is not to exceed diameter...

MINI-CON SERIES DIMENSION DETAILS MINI-CON Flange Connector Receptacle Mates with MIN-CCP Dummy Connector: MIN-DSP StCIION A-A SPOT FACE CHAMETER 52/ CHAMFER OWMETER NOTES: ■ For contact configurations please refer to pages 16-20. ■ When ordering MIN-FCR you receive: 2, 3, 5, 6, 7, 12, 13. Please refer to the MINI-CON master parts and materials list on page 15. ■ Screw caps are not included. ■ * This dimension is to be used if spotface is less than or equal to 0.001 inches deep. ■ ** This dimension is to be used if spotface is greater than 0.001 inches deep. ■ Chamfer is to be 20° + 5°. ■...

MINI-CON SERIES DIMENSION DETAILS MINI-CON SERIES DIMENSION DETAILS MINI-CON Bulkhead Connector Receptacle Mates with MIN-CCP Dummy Connector: MIN-DSP THROUGH BORE OPTION BCR-DO MOUNTING INFORMATION SIZE ■ For contact configurations please refer to pages 16-20. ■ When ordering MIN-BCR-DO you receive: 2, 3, 5, 6, 7, 12, 43, 44, 45. Please refer to the MINI-CON master parts and materials list on page 15. ■ Nut and washer are optional. ■ Bore must be perpendicular to spot face. ■ Spotface diameter to be equal or greater than the connector diameter. ■ If threaded mount is used, thread must be...

MINI-CON SERIES DIMENSION DETAILS MIN-CCR -CON Cable Connector Receptacle Mates with MIN-CCP Dummy Connector: MIN-DSP MINI-CON SERIES MIN-CCP MINI-CON Cable Connector Plug Mates with MIN-BCR/FCR/CCR Dummy Connector: MIN-DSR CCP/L ENGAGING NUT TORQUE INFORMATION 5LCIIUN A A NOTES: ■ For contact configurations please refer to pages 16-20. ■ For maximum cable O.D please refer to page 15. ■ When ordering MIN-CCR you receive: 3, 5, 6, 7, 15. When ordering MIN-CCP you receive: 20, 21,22, 23, 24, 25, 26, 27, 28. Please refer to the MINI-CON master parts and materials list on page 15. ■ * BCR may...

UNDERWATER ELECTRICAL DRY-MATE CONNECTORS PRODUCT NEWS jfkfJ` lk DUMMY CONNECTORS ` INTRODUCTION As part of our continuous improvement process, the pb^`lk Group consistently reviews its product ranges through both customer feedback and internal improvements. It is via these processes that pb^`lk identified a design enhancement to the jfkfJ`lk dry-mate connector range. DESIGN FEATURES The design change is associated with the dummy connectors. With more and more customers requiring a lanyard attached to the dummy connectors to prevent loss, the DSP/DSR/PSP & PSR have been lengthened slightly...

MINI-CON SERIES DIMENSION DETAILS MINI-CON SERIES MINI-CON SERIES MIN-DSR (DSRL - LONG) MIN-DSP (DSPL - LONG) MINI-CON Dummy Sealing Plug Mates with MIN-BCR/FCR/CCR (BCRL/FCRL/CCRL) DSP/L ENGAGING NUT TORQUE INFORMATION DUMMY / SPLASHPROOF CONNECTOR SIZE MINI-CON SERIES MIN-PSR (PSRL - LONG) MINI-CON SERIES MIN-PSP (PSPL - LONG) MINI-CON Plastic Splashproof Receptacle Mates with MIN-CCP (CCPL) MINI-CON Plastic Splashproof Plug Mates with MIN-BCR/FCR/CCR (BCRL/FCRL/CCRL) NOTES: ■ When ordering MIN-DSR (DSRL) you receive: 3, 29. When ordering MIN-DSP (DSPL) you receive: 23, 24, 27, 28, 31....

MINI-CON SERIES DIMENSION DETAILS MINI-CON SERIES DIMENSION DETAILS CCP/L ENGAGING NUT TORQUE INFORMATION MINI-CON SERIES MIN-CCP-PBOF-HP-R/A SIZE MINI-CON Cable Connector Plug Pressure Balanced Oil Filled High Pressure Right Angle Mates with MIN-BCR-PBOF/FCR-PBOF/CCR-PBOF CONNECTOR MINI-CON PBOF The time proven MINI-CON PBOF connector system has been upgraded. The new line which is called the MINI-CON-PBOF-HP (High Pressure) has actually been in service with some of our customers for the last eighteen years. At this time, it is replacing the traditional MINI-CON PBOF across the board....