Catalog excerpts
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET OPTICAL FIBER MANAGEMENT SYSTEMS Optical Fiber Jumper System DESCRIPTION In underwater operations, optical fiber connections provide the communications path between underwater equipment, facilitate inter-connection of expansion and allow in-situ diagnostics. They require specifically designed underwater connectors capable of repeated connection and disconnection at ocean depths where this equipment is located. Optical fiber is fragile and requires proper handling and protection from deployment and the effects of temperature and pressure in underwater environments. Flexible oil-filled hose conduits allow the installation and feed-through of optical fibers between underwater connectors whilst protecting them within the oil-filled conduit. Optical fibers can be individual, bundles and/or ribbons. The hose conduit, by design, is flexible to accommodate handling on the surface and underwater by divers or Remotely Operated Vehicles (ROV's), or Autonomous Underwater Vehicles (AUV's). This flexibility allows the hose to be stored, installed, coiled or uncoiled. Additionally, the optical fibers require protection from the forces associated with the handling and operation of underwater connectors and consequent movement of the hose conduit, combined with exposure to extreme environmental conditions. This requires special management of the optical fibers within the hose. QUALITY · pb^`lk Advanced Products, LLC operate a Quality Management System certified to ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007. SAPL-DS-0410 OPTICAL FIBER MANAGEMENT Rev 1 Page 1 of 2 pb^`lk Advanced Products, LLC. 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com
Open the catalog to page 1
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET KEY FEATURES The management of the optical fibers within the hose conduit is a requirement for the following reasons: · pb^`lk has developed a proprietary modular optical fiber management design that allows interfacing to a variety of connectors, splice boxes and subsea umbilical termination assemblies. · Optical fibers are fixed at each end of the hose conduit to allow connection to the underwater connectors or penetrators. evao^ifdeq OPTICAL WET-MATE CONNECTOR · Optical fiber over-length is required to cater for flexible hose stretch. ·...
Open the catalog to page 2All SEACON (Europe) catalogs and brochures
-
CS-MS Catalog Section - Rev IX11 Pages
-
GRE23 Pages
-
RUBBER-MOLDED_lres139 Pages
-
SAPL-DS-0110 MSSQ FCR Rev 32 Pages
-
SUTA2 Pages
-
MSSQ RUFF-NEK2 Pages
-
DS-05002 Pages
-
DS-04122 Pages
-
DS-04022 Pages
-
DS-04013 Pages
-
DS-03701 Pages
-
DS-01832 Pages
-
DS-01802 Pages
-
DS-01202 Pages
-
DS-01003 Pages
-
DS-00904 Pages
-
DS-00804 Pages
-
DS-00632 Pages
-
DS-00624 Pages
-
DS-00614 Pages
-
DS-00402 Pages
-
DS-00301 Pages
-
DS-00183 Pages
-
DS-00163 Pages
-
SEACON PRODUCTS 2015/168 Pages
-
SAPL-DS-0107 ATA Rev 42 Pages
-
SAPL-DS-0108 FITA Rev 32 Pages
-
SAPL-DS-0109 RA FCR Rev 22 Pages
-
SCE-DS-0002 PEEK 55 Rev 44 Pages
-
SCE-DS-0006 MSS Rev 26 Pages
-
SCE-DS-0009 VITON Rev 33 Pages
-
SAPL-DS-0020 Limit Switches2 Pages
-
SAPL-DS-0121 Oil Filled Hose2 Pages
-
SAPL-DS-0006 MICROSTAR2 Pages
-
FIBER-OPTICS_Rev-VII_lres133 Pages
-
GLOBE-CON_Rev-II_lres18 Pages
-
MSS_Rev-VIII_lres121 Pages
-
U-MATE_Rev-I_lres111 Pages
-
ALL-WET_Rev-VII_lres129 Pages
-
SEA-MATE_Rev-III_lres220 Pages
-
SAPL-DS-0002-S-Series-S1-2 Pages
-
SPECIALTY-PRODUCTS_lres23 Pages
-
SWITCHES_lres114 Pages
-
FIELD-INSTALLABLE_lres120 Pages
