Catalog excerpts
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET SUBSEA JUMPER ASSEMBLIES AND DISTRIBUTION HARNESS DESCRIPTION Subsea jumper assemblies and distribution harnesses are provided by pb^`lk for use with pb^`lk subsea connectors. Many subsea electrical and optical cable and connection systems utilize Pressure Balanced Oil Filled (PBOF) cabling solutions. These cables utilize an elastomeric tube as a conduit for electric wires and fiber optic lines. The elastomeric conduit is filled with a compensating fluid, allowing the sea pressure to freely communicate with the interior oil volume, equalizing the pressure in the assembly. This option for cabling provides for a reliable and configurable cable system suitable for many subsea applications. This technology has been widely utilized in ocean science observatories, towed arrays, drilling systems, production control systems and Remotely Operated Vehicle (ROV) systems to name a few. They have become a critical component in many subsea systems today and Seacon is pleased to offer this solution with its Subsea fiber optic and electrical connectors. KEY FEATURES · Integral fiber management system within hose to mitigate excessive movement or forces applied directly to the internal fibers · Good cable flexibility (typical 5" bend radius) · Enhanced visibility, typically Orange and Yellow in color (other colors available) · Deployment techniques similar to jacketed cable · Good ROV maneuverability during connector mating · Easy interface to connector · Early leak detection; some hoses are designed for over-pressure and may be used to offer visible leak paths · Ease of repair · Double Barrier against water ingress · Temperature and pressure Compensated · Size 13mm & 20mm ID (Other sizes available upon request) · Multi-mode and single-mode available SAPL-DS-0402 JUMPER ASSEMBLIES Rev 2 Page 1 of 2 pb^`lk Advanced Products, LLC. 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com
Open the catalog to page 1
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET DESIGN RATINGS · Up to 3.3kV, 30 amp ratings · 25 year life · Working Depth: 4,500 meters · Bending Radius: 150mm · Working Temperature: -4ºC to +25ºC · Storage Temperature: -40ºC to +70ºC MATERIALS · Inner Liner - SBR · Outer Jacket - NBR/PVC · Armour - Polyester · Strain Element - Aramid (Kevlar) PRINCIPLE OF OPERATION Attaching electrical and fiber optic subsea connectors to PBOF cables have become a very common method for subsea jumpers and distribution assemblies. The hose is attached to the subsea connector by a robust mechanically...
Open the catalog to page 2All SEACON (Europe) catalogs and brochures
-
CS-MS Catalog Section - Rev IX11 Pages
-
GRE23 Pages
-
RUBBER-MOLDED_lres139 Pages
-
SAPL-DS-0110 MSSQ FCR Rev 32 Pages
-
SUTA2 Pages
-
MSSQ RUFF-NEK2 Pages
-
DS-05002 Pages
-
DS-04122 Pages
-
DS-04102 Pages
-
DS-04013 Pages
-
DS-03701 Pages
-
DS-01832 Pages
-
DS-01802 Pages
-
DS-01202 Pages
-
DS-01003 Pages
-
DS-00904 Pages
-
DS-00804 Pages
-
DS-00632 Pages
-
DS-00624 Pages
-
DS-00614 Pages
-
DS-00402 Pages
-
DS-00301 Pages
-
DS-00183 Pages
-
DS-00163 Pages
-
SEACON PRODUCTS 2015/168 Pages
-
SAPL-DS-0107 ATA Rev 42 Pages
-
SAPL-DS-0108 FITA Rev 32 Pages
-
SAPL-DS-0109 RA FCR Rev 22 Pages
-
SCE-DS-0002 PEEK 55 Rev 44 Pages
-
SCE-DS-0006 MSS Rev 26 Pages
-
SCE-DS-0009 VITON Rev 33 Pages
-
SAPL-DS-0020 Limit Switches2 Pages
-
SAPL-DS-0121 Oil Filled Hose2 Pages
-
SAPL-DS-0006 MICROSTAR2 Pages
-
FIBER-OPTICS_Rev-VII_lres133 Pages
-
GLOBE-CON_Rev-II_lres18 Pages
-
MSS_Rev-VIII_lres121 Pages
-
U-MATE_Rev-I_lres111 Pages
-
ALL-WET_Rev-VII_lres129 Pages
-
SEA-MATE_Rev-III_lres220 Pages
-
SAPL-DS-0002-S-Series-S1-2 Pages
-
SPECIALTY-PRODUCTS_lres23 Pages
-
SWITCHES_lres114 Pages
-
FIELD-INSTALLABLE_lres120 Pages
