Boat Model Specifications Summary

This document provides detailed technical specifications for a wide range of boat models, primarily from SeaArk Boats. The data is presented in tabular form listing key parameters for each model.

Main Sections and Content

1. Model Identification

Each entry begins with a model code or name (e.g., 1448FN, 1652MV, MUDRUNNER 170, RX/RXT 160, etc.) which identifies the specific boat variant.

2. Dimensional Specifications

• Length: Given in feet and inches (e.g., 14', 16', 20'1", 24').
• Side Height: Typically in inches (e.g., 67", 72", 95").
• Depth: Measured in inches (e.g., 48", 52", 60", 72").
• Bottom Width: Provided in inches (e.g., 20", 24", 28").
• Beam: Width of the boat, in inches (e.g., 100, 125 gauge thickness).

3. Construction Parameters

• Gauge: Thickness of the hull material, mostly .100 or .125 inches.
• Transom Height: Height of the transom in inches (e.g., 15/20", 20", 25").

4. Performance and Capacity

• Weight Capacity: Given in pounds, sometimes with ranges or notes indicating higher horsepower compatibility when equipped with floor and console.
• Horsepower Rating: Maximum recommended horsepower, sometimes given as a range (e.g., 45/50*, 60/90*).
• Approximate Weight: Weight of the boat in pounds.
• Persons Capacity: Number of persons the boat can safely carry (e.g., 15/20, 20, 25).

5. Notes and Special Conditions

Some models have asterisks indicating that higher horsepower can be added if the boat is equipped with a floor and console. This is critical for safe operation and performance.

Key Observations and Recommendations

• The specifications cover a broad range of boat sizes from approximately 14 feet to 24 feet in length.
• Gauge thickness varies between .100 and .125 inches, indicating different hull strength and durability levels.
• Horsepower ratings vary widely, with some models supporting up to 300 HP, reflecting their intended use and structural design.
• Transom heights are matched to boat size and horsepower capacity, important for engine mounting and performance.
• Weight and persons capacity are balanced to ensure safety and compliance with design limits.
• Users should note the conditions for higher horsepower ratings, ensuring proper outfitting with floor and console to maintain safety.

Summary Table Interpretation

The tabular data provides a comprehensive reference for selecting a boat model based on size, capacity, and performance needs. It is essential for dealers, buyers, and operators to consider all parameters, especially horsepower rating and weight capacity, to ensure optimal and safe use.

For detailed model-specific inquiries, refer to the exact model code and corresponding row in the table.

Source

Specifications sourced from SeaArk Boats, "Boats Built For a Lifetime." Website: www.seaarkboats.com