Catalogs >
Sea Hawk >
Tropikote™

Tropikote™
3Pages

Catalog excerpts

Revision date: April 2019 Technical Data Sheet Hard, Modified Epoxy Antifouling 2100 Series Highest Copper Content • Maximum Copper Exposure • Aggressively Combats Growth • Same Copper Content for Every Color PRODUCT DESCRIPTION PRODUCT INFORMATION Sea Hawk’s top-of-the-line hard Colors: Black 2145, Blue 2142, Dark Blue 2140, Green 2143 antifouling paint contains over 75% Finish/Sheen: Semi-gloss cuprous oxide. This multi-season bottom paint aggressively combats ALL types of fouling and reduces hull maintenance with year-round, trouble free performance. Superior adhesion to fiber-glass, wood and steel hulls makes it ideal for any vessel. Use for over coating, without the fear of lifting. Copper Content: 75.8% (2243 g/l) all colors Volume Solids: 60% ± 2% Solids by Weight: 78% Mix Ratio: One Pack Shipping Weight: Black - 24.80 Lbs/Gal (11.24 kl/Gal) Blue - 25.08 Lbs/Gal (11.37 kl/Gal) Dark Blue - 25.64 Lbs/Gal (11.63 kl/Gal) Green - 25.49 Lbs/Gal (11.56 kl/Gal) *All colors are not available in all states Flash Point: 100° F (38° C) VOC: 288 Grams/Liter Typical Film Thickness: Pleasure craft: 3.0 mils (76.2 µ) dry film thickness (DFT) per coat, (5.0 mils (127 µ) wet film thickness (WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 1.3 mils (33.02 µ) dry film thickness (DFT) per coat, (2.2 mils (55.88 µ) wet film thickness(WFT)), 2 coats on entire hull. Commercial Marine: 4.0-5.0 mils (101.6-127 µ) dry film thickness (DFT) per coat by spray application, (6.7-8.0 mils (170.18-203.2 µ) wet film thickness (WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Theoretical Coverage: 320 sq.ft./gal. (29.72 m2) @ 3.0 mils (76.2 µ) DFT FEATURES & BENEFITS • Highest quality grade of cuprous oxide available (more potent active ingredient) (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7

Open the catalog to page 1

Technical Data Sheet • Highest copper content in the industry (75.8%) • Better color consistency for color matching • Consistent viscosity = better flow and rolling ability • May be used on fast or slow moving vessels APPLICATION DETAILS Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Pleasure Craft (Drying time in hours): Substrate Temp. Minimum Launch Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. Note: If the vessel is launched, and then rehauled, air exposure should be...

Open the catalog to page 2

Technical Data Sheet prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100° F (4-38° C). Prolonged atmospheric exposure of this product may detract from performance. Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application procedures. As application, environmental and design factors can vary significantly due care should be exercised in the selection, verification of performance, and use of the coating. APPLICATION DATA Mixing:...

Open the catalog to page 3