1. Catalogs
  2. Sea Hawk
  3. Talon Hard Antifouling

Talon Hard Antifouling

Talon Hard Antifouling

Talon Hard Antifouling

Product catalog summary
Product Overview
Talon is a copper-based hard modified epoxy antifouling paint designed for single-season use on various types of vessels. It effectively combats marine fouling in both fresh and saltwater environments.

Specifications
  • Colors: Black, Blue, Dark Blue, Red, Green
  • Finish: Semi-Gloss
  • Copper Content: 33%
  • Volume Solids: 62% ± 2%
  • Shipping Weight: 16-17 lbs/gal
  • Flash Point: 100°F
  • VOC: 310 grams/liter
  • Film Thickness: 2.5 mils DFT for pleasure craft, 3.0-5.0 mils DFT for commercial marine
  • Recommended Coats: 2 heavy coats on the hull, 3 at waterline/high wear areas
  • Theoretical Coverage: 291 sq.ft./gal at 2.5 mils DFT
  • Shelf Life: 30 months

Features and Benefits
  • High-grade cuprous oxide
  • Self-polishing polymer binding system
  • Color consistency
  • Compatibility with most existing antifouling paints

Application Guidelines
  • Methods: Airless/conventional spray, solvent-resistant rollers, brushes
  • Mixing: Thorough mixing required
  • Additives: Up to two pints of BioBoost per gallon
  • Thinning: Maximum 10% with Sea Hawk 2033, 2035
  • Cleaning: Sea Hawk 2033, 2035, Xylene
  • Safety: Consult Material Safety Data Sheet before use

Surface Preparation
  • Ensure surfaces are clean and dry
  • Compatibility checks required for previously painted surfaces
  • Specific guidelines for fiberglass, wood, aluminum, and steel hulls

Limitations
  • Apply in temperatures above 50°F (10°C)
  • Surface temperature must be at least 50°F above dew point
  • Store unmixed material between 40° and 100°F
See more

Catalog excerpts

Talon Hard Antifouling-1

Talon Hard Antifouling Hard Modified Epoxy Antifoulant 6000 Series Durable Hard Antifouling Paint Used on All Types of Vessels Dependable Performance Product Description Talon is a new single season copper-based hard modified epoxy paint from Sea Hawk Paints. Talon may be applied over most antifouling coatings and aggressively combats all types of marine fouling in fresh and saltwater. Features and Benefits Highest Grade of Cuprous Oxide Available Harder, Self-Polishing Polymer Binding System Better Color Consistency for Color Matching Compatible Over Most Existing Antifouling Paints. Product Information Colors: Black-6045, Blue—6042 Blue, 6030-Dark Blue, 6041Red, 6043-Green Finish/Sheen: Semi-Gloss Copper Content: 33% (all Colors) Volume Solids: 62% +\- 2% Shipping Weight: 16-17 Lbs./Gal. Flash Point: 100° F Application Controls Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Dry Times and Overcoating Intervals: Pleasure Craft Drying time in Hours Substrate Temp. Touch Min Max Minimum Launch 73°F (23°C) 2 hr 1 hr Not Critical 12 hrs 95°F (35°C) 1 hr 1 hr Not Critical 12 hrs VOC: 310 Grams/Liter Typical Film Thickness: Pleasure Craft: 2.5 mils dry film thickness (DFT) per coat, (5.5 mils wet film thickness (WFT)) Commercial Marine: 3.0-5.0 mils DFT per coat by spray application (6.6– 11.0 Mils WFT) Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. Recommended Coats: 2 heavy coats on entire hull and 3 at waterline and other high wear areas Theoretical Coverage: 291 Sq.Ft./Gal. @ 2.5 mils DFT Shelf Life: 30 months when stored under cool, dry conditions NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

 Open the catalog to page 1
Talon Hard Antifouling-2

Talon Hard Antifouling Surface Preparation Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI) 6000 Series Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compatibility Chart to ensure compatibility when applying TALON antifouling paint over existing bottom paint. Previously Painted Surfaces: TALON is suitable for application over previous painted surfaces per compatibility check. For correct procedures please refer to the Application Guidelines for Fiberglass/Gelcoat. Fiberglass or Vinyl...

 Open the catalog to page 2

All Sea Hawk catalogs and brochures

  1. BIOCOP TF

    3  Pages

  2. TROPIKOTE EX

    3  Pages

  3. R1

    4  Pages

  4. Tropikote™

    3  Pages

  5. AF-33

    2  Pages

  6. Cukote

    2  Pages

  7. Mission Bay

    2  Pages

  8. Gel Coat

    2  Pages

  9. S-90

    1  Page

  10. sHAWKocon?

    2  Pages

  11. S-76

    2  Pages

  12. Tuff Stuff

    3  Pages

  13. Hawk Filler

    2  Pages

  14. Aluma Hawk

    2  Pages

  15. BiocopTF

    3  Pages

  16. Hawks Grip

    2  Pages

  17. Tin Booster

    1  Page

  18. Bio-Boost

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.