Catalogs >
Sea Hawk >
SHARKSKIN

SHARKSKIN
2Pages

Catalog excerpts

Revision date: April 2019 Technical Data Sheet Modified Epoxy 6100 Series Heavy-Duty Protection • Hard Modified Epoxy • Effective Copper Content • Premium Antifouling Protection in Both Freshwater and Saltwater PRODUCT DESCRIPTION Sharkskin is Sea Hawk’s traditional PRODUCT INFORMATION Colors: Black 6145, Blue 6142, Dark Blue 6140, Red 6141, Green 6143 hard-modified epoxy paint. Sharkskin Finish/Sheen: Semi-gloss aggressively combats all types of marine fouling including barnacles, sea Copper Content: 45.2% (1013 g/l) all colors grass, green weed and other fouling organisms in fresh and saltwater. Sharkskin can be applied over most antifouling coatings. Shipping Weight: Black 18.23 Lbs/Gal (8.26 kl/Gal) Blue 18.51 Lbs/Gal (8.39 kl/Gal) Dark Blue 18.57 Lbs/Gal (8.42 kl/Gal) Red 18.73 Lbs/Gal (8.49 kl/Gal) Green 18.68 Lbs/Gal (8.47 kl/Gal) *All colors are not available in all states Flash Point: 80°F (27°C) VOC: 365 Grams/Liter Typical Film Thickness: Pleasure craft: 3.1 mils (78.7 µ) dry film thickness (DFT) per coat, (5.0 mils (127 µ) wet film thickness (WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 2.2 mils (55.9 µ) dry film thickness (DFT) per coat, (3.6 mils (91.44 µ) wet film thickness (WFT)), 2 coats on entire hull. Theoretical Coverage: 320 sq.ft./gal. at 3.1 mils (78.4 µ) dry film thickness FEATURES & BENEFITS • Most effective copper release rate • Highest grade of cuprous oxide available (more potent active ingredient) • Better color consistency for color matching • Consistent viscosity = better flow and rolling ability (Page 1 of 2) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.5

Open the catalog to page 1

Technical Data Sheet Cleaning: Clean all equipment immediately after use with Sea Hawk 2033. It is a good practice to periodically flush out spray equipment during the course of the day. Frequency should depend upon amount sprayed, temperature, elapsed time including delay, etc. • May be applied over other modified epoxy antifoulant paints (See Compatibility Chart) APPLICATION DETAILS Method: Brush, roller or spray Safety: Prior to use, obtain and consult the “Safety Data Sheet” for this product for health and safety information. Read and observe all precautionary notices on container...

Open the catalog to page 2