S-76
2Pages

{{requestButtons}}

Catalog excerpts

S-76 - 1

Designed for Use on Bare Aluminum S-76 Tack Coat Primer For Use on Hulls, Running Gear, Trim Tabs, and Shafts Used as a tack coat prior to coating with high build primers Product Description S-76 Tack Coat Primer is for use on properly prepared steel, aluminum or galvanized steel. S-76 is an anti-corrosive strontium chromate base primer that is specifically designed for underwater metal surfaces including hulls, running gear, and the lower units of outboards and I/O’s. It provides an excellent barrier to reduce pitting of the metal from galvanic corrosion. S-76 should be used in conjunction with another primer such as Tuff Stuff prior to applying antifoulant/topcoat. Only Product Like it on the Market Easy to Work With and Apply Part of the Sea Hawk Aluminum Barrier Coat System Preferred by Mega Yachts Product Information Application Details Light Yellow Brush, Roller or Spray Induction Time: Voume Solids: Shipping Weight: Flash Point: Film Thickness: 2.2 mils wet equals 1 mil dry per coat Recommended Coats: Theoretical Coverage: 741 Sq.Ft./Gl @ recommended film thickness Overcoating Interval Drying time in Hours Substrate Temp. Touch S-76 should be used in conjunction with another primer such as Tuff Stuff prior to applying antifoulant/topcoat. Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. This product is a multiple component paint coating and is not to be used alone. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Open the catalog to page 1
S-76 - 2

Tack Coat Primer When over coating S-76 Tack Coat Primer, it is important to meet the required over coating times in order to achieve the best adhesion because temperature and humidity control dry times. It is hard to give exact times of cure. An easier rule in epoxies is when the coating is dry to the touch, yet still has some tack; is ready to be over coated. However, if the coating is completely cured (generally, +8 hours or more) it needs to be thoroughly sanded with 80 grit sand paper to remove shine. If the coating is not sanded after full cure, application of additional primers will...

Open the catalog to page 2

All Sea Hawk catalogs and brochures

  1. BIOCOP TF

    3 Pages

  2. TALON

    3 Pages

  3. TROPIKOTE EX

    3 Pages

  4. MONTEREY

    2 Pages

  5. R1

    4 Pages

  6. SHARKSKIN

    2 Pages

  7. Tropikote™

    3 Pages

  8. AF-33

    2 Pages

  9. Cukote

    2 Pages

  10. Mission Bay

    2 Pages

  11. Biocop TF

    3 Pages

  12. Gel Coat

    2 Pages

  13. S-90

    1 Pages

  14. sHAWKocon?

    2 Pages

  15. Tuff Stuff

    3 Pages

  16. Hawk Filler

    2 Pages

  17. Aluma Hawk

    2 Pages

  18. BiocopTF

    3 Pages

  19. Hawks Grip

    2 Pages

  20. Tin Booster

    1 Pages

  21. Bio-Boost

    1 Pages

  22. Talon

    2 Pages

  23. Sharkskin

    2 Pages

  24. Monterey

    2 Pages

Archived catalogs

  1. Brochure

    20 Pages