Catalogs >
Sea Hawk >
S-75 and S-75C

S-75 and S-75C
1 / 2Pages

Catalog excerpts

S-75 ALUMI-CHROME Marine Wash Primer CHEMICAL BONDING TO METAL • Anticorrosive Properties • Adhesion Promoter Application Details Product Description This two-component zinc chromate pigmented, polyvinyl butryl coating. It serves as an excellent bond coat to many surfaces including aluminum, galvanized metal, lead, brass, magnesium, and other porous metals. This product is transparent yellow meeting specification MIL-C-851C. Method: Induction/ Sweat-in Time: Thinner: Cleaner: Pot Life: Brush or spray N/A N/A Sea Hawk 7130 4 Hrs @ 100% transfer efficiency Product Information Colors: Finish/Sheen: Transparent Yellow Flat Volume Solids: Solids by Weight: Mix Ratio: Shipping Weight: Flash Point: VOC: Film Thickness: Recommended Coats: Theoretical Coverage: 300 sq.ft./gal. @ recommended film thickness Overcoating Interval Drying Time (Hrs) Substrate Temp. Touch Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • (727) 523-8053 • 1-800-528-0997 • FAX (727) 523-7325

Open the catalog to page 1

S-75 ALUMI-CHROME Marine Wash Primer Apply in good weather when air and surface temperatures are above 50°F (10°C). Surface temperature must be a least 50°F (10°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38°C). Apply by brush or spray. Apply .4-.6 mils wet. S-75 is a pre-treatment coating intended to be used on clean metal prior to the application of any primer, and is not intended as a...

Open the catalog to page 2