Catalog excerpts
Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing Revision date: March 2014 Construction and Repairs • Fiberglass Construction & Repairs • Home Construction & Repairs • Bonds to Most Surfaces including Wood, Fiberglass, Metals, Foam, Plastic and Fabrics PRODUCT DESCRIPTION STEP 1 - EPOXY RESIN (CHOOSE SYSTEM SIZE) HAWK EPOXY is a 100% clear, lowviscosity, low-blush system designed for ease of use in the widest variety of construction and repair projects. R1 Epoxy Resin - a smooth, low-viscosity liquid epoxy resin. With a variety of Hawk Epoxy Catalysts, it can be cured under a wide range of temperatures and environmental conditions to form a highstrength plastic with superior moisture barrier characteristics. The flexibility of HAWK EPOXY lies in its huge range of CATALYST and FILLERS to adapt to any situation. If you need a fast cure due to schedule constraints or if you need a very thick fairing compound, HAWK EPOXY has the situation covered. After the application is cured, it can be sanded into fine tuned shape for the highest quality finish. Epoxy Resin - 1 Quart Epoxy Resin - 1 Gallon Epoxy Resin - 4.35 Gallon Epoxy Resin Drum - TBD Hawk Epoxy is available in four system sizes color coded on each label. Note: Mix ratios vary by catalyst. For optimal product utilization, be sure to choose the same Size for both the resin and catalyst. Refer to page 4 for Directions for Use. STEP 2 - SELECT YOUR CATALYST Hawk Epoxy Catalyst Minimum Recommended Temperature (˚F) Working Time Thin Film* Cure to Solid Thin Film* Cure to Working Strength Mix Ratio Resin/ Catalyst For use in the warmest conditions or when more time is needed for application C1 Ultra Slow Catalyst C2 Slow Cure Catalyst For use in colder temperatures or when a fast cure is needed With it’s ease of use, thin layer roll out capabilities and low blush, HAWK EPOXY is the easy choice for all epoxy resin projects. Resin/ Catalyst Advantages C3 Fast Cure Catalyst C5 Clear Finish Catalyst For use in clear coating, carbon fiber application or reduced blush in humid conditions *Epoxy cures faster at higher temperatures and in thicker applications. (Page 1 of 4) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.
Open the catalog to page 1
Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing C1 ULTRA SLOW CURE CATALYST/R1 RESIN C2 SLOW CURE CATALYST/R1 RESIN Size 1 Size 2 Size 3 Size 4 Designed for use with HAWK EPOXY R1 Resin for construction and repairs with superior adhesion, strength, bonding, filling, and moisture barrier qualities at cooler temperatures and for a fast cure. Do not use under Sea Hawk marine wood varnish. Description Fast Cure Catalyst - .4 Pint Fast Cure Catalyst - .8 Quart Fast Cure Catalyst - .87 Gallon Fast Cure Catalyst - TBD System Size Ultra Slow Catalyst Quart - .66...
Open the catalog to page 2
Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing STEP 3 - SELECT YOUR FILLER (OPTIONAL) HAWK EPOXY FILLER SELECTION GUIDE MORE STRENGTH LESS STRENGTH Bonding Hardware General Bonding Bonding with fillets Laminating Fairing Filler suitability: = Best F1 High Load Adhesive Fiber Filler - Thickens to a light grey color creating an easy to use adhesive designed for bonding hardware and other applications with dissimilar materials. This mixture will maximize bond strength for anticipated high loads. F2 Structural Adhesive Filler - Thickens to an off white color,...
Open the catalog to page 3
Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing RESIN & CATALYST DIRECTIONS FOR USE Preparation: Apply over clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent, such as, S-80 Wax N Grease Killer or detergent washing. (SSPC-SPI). Non-porous substrates must be sanded to create a rough surface for stronger bonding and adhesion. Remove all dust prior to application. DISPENSING: Do not adjust ratio (R1 Epoxy Resin/Catalyst) to alter cure time. Use the exact mixing ratio as described on page 2 of this document or on the Catalyst...
Open the catalog to page 4All Sea Hawk catalogs and brochures
-
BIOCOP TF3 Pages
-
Smart Solution Brochure4 Pages
-
Marine Paint Stripper 12802 Pages
-
TROPIKOTE EX3 Pages
-
Islands 99 plus2 Pages
-
2019 CUKOTE 330 VOC3 Pages
-
ISLANDS 44 PLUS HARDER3 Pages
-
Tropikote™3 Pages
-
Vinyl Ester Resin3 Pages
-
Captain Jack’s VARNISH2 Pages
-
Islands 44 Plus™ HARDER3 Pages
-
2018 CUKOTE 330 VOC3 Pages
-
Islands 44 TF™3 Pages
-
AF-332 Pages
-
Cukote2 Pages
-
Mission Bay2 Pages
-
Gel Coat2 Pages
-
Hawk Epoxy BROCHURE4 Pages
-
S-901 Pages
-
Marine Paint Stripper2 Pages
-
Silver Bullet?2 Pages
-
Black Barrier Coat2 Pages
-
sHAWKocon?2 Pages
-
S-762 Pages
-
S-75 and S-75C2 Pages
-
Tuff Stuff3 Pages
-
Hawk Epoxy RESIN4 Pages
-
Hawk Filler2 Pages
-
Aluma Hawk2 Pages
-
BiocopTF3 Pages
-
Captain Jack s VARNISH2 Pages
-
Non-Sanding Primer2 Pages
-
Island Prime Sealer2 Pages
-
Hawks Grip2 Pages
-
Barrier Coat Primer2 Pages
-
Tin Booster1 Pages
-
Bio-Boost1 Pages
-
Tropikote Biocide Plus?2 Pages
-
Cukote Biocide2 Pages
Archived catalogs
-
Talon Hard Antifouling2 Pages
-
Sharkskin Modified Epoxy2 Pages
-
Sea Hawk Compatiblity Chart3 Pages
-
Brochure20 Pages
