1266 Fiberglass Treatment Chemical Bonding Product Permanently Tacky Adhesion Promoter Non-Sanding Primer Product Description 1266 Fiberglass Treatment is intended for application directly to the fiberglass in place of sanding when applying antifouling paint to the bottom of a vessel. Application Details Colors: Sea Hawk 2033 Cleaner: Sea Hawk 2033 Pot Life: Not Applicable One Pack Copper Content: Not Applicable Flat Converter: Induction Time: Red Finish/Sheen: Brush, Roller or Spray Thinner: Product Information Method: N/A Overcoating Interval Voume Solids: Drying time in Hours Solids by Weight: 3% Mix Ratio: One Pack Shipping Weight: 7 Lbs. Flash Point: VOC: Max. N/A Launch 12 Hrs Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. .3-.5 mils wet Recommended Coats: Min. 1 Hr +500 Grams/Liter Film Thickness: Substrate Temp. Touch 73°F (23°C) 2 Hr 1 Theoretical Coverage: 600 Sq.Ft./Gl @ recommended film thickness NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

1266 APPLICATION Fiberglass Treatment Non-Sanding Primer Apply by brush, roller or spray. Apply .5 mils wet Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum 28:1 ratio pump; “0.021-0.026" (533660 microns) orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Thinning N/A Cleanup Clean all equipment immediately after use with Sea Hawk 7130. It is a good practice to periodically flush out spray equipment during the course of the day....