Hawk PREMIUM YACHT FINISHES Copper-Free Ablative Copper and Tin Free Environmentally Friendly UV Reactive Biocide Product Description Benefits VS. Competition Colors: Copper-Free Self-polishing antifoulant. When exposed to UV light, the Nano-Based technology copolymer releases the active non-metal biocide which dissipates in seconds without bioaccumulation into the environment. Mission Bay may be used on aluminum hulls without the use of a traditional barrier coat system. Product Information Red 4001, Blue 4002, Green 4003 Black 4005, and Off-White 4010 Finish/Sheen: Converter: Copper Content: Voume Solids: Solids by Weight: Mix Ratio: Shipping Weight: • Safest, environmentally-friendly product on the market • The most advanced non-metal biocide available • Completely eliminates the leaching of copper compounds into the environment • Ablative and self-polishing • No barrier coat needed over most antifouling paints • Ideal for all types of craft - fiberglass to aluminum • Helps prevent electrolysis Method: Brush, Roller or Spray Induction Time: Not Applicable Thinner: Sea Hawk 2033 Cleaner: Sea Hawk 2033 Pot Life: Not Applicable Drying time in Hours Flash Point: VOC: Film Thickness: Substrate Temp. 105°F 298 Grams/Liter 6 mils wet equals 2.7 dry per coat Recommended Coats: 3 Full Coats on entire hull Theoretical Coverage: 267 Sq.Ft./recommended film thickness Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Surface Preparation Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI) Superior Protection No Environmental Impact Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compatibility Chart to ensure compatibility when applying MISSION BAY antifouling paint over existing bottom paint. Previously Painted Surfaces: is suitable for application over previous painted surfaces per compatibility check. For correct procedures please refer to the Application Guidelines for Fiberglass/Gelcoat. Fiberglass...