Catalogs >
Sea Hawk >
MISSION BAY CSF

MISSION BAY CSF
2Pages

Catalog excerpts

Technical Data Sheet Copper-Free Nano-Based Technology 4500 Series Nano-Based Technology • Copper-Free, Tin-Free and Solvent-Free • Environmentally friendly • UV-reactive biocide PRODUCT DESCRIPTION Copper and Solvent-Free (CSF) PRODUCT INFORMATION ablative, self-polishing antifoulant. Colors: Black 4505, Bright Blue 4502, Bright Green 4503, Bright White 4510 Enhanced, Nano-Based Technology Finish/Sheen: Semi-gloss copolymer, biocide release mechanism. Prevents coating buildup and reacts Copper Content: 0% all colors with UV light. Mission Bay CSF may be used on aluminum hulls without the use of a traditional barrier coat system. Shipping Weight: Black - 13.25 Lbs/Gal (6.01 kg/Gal) Bright Blue - 13.20 Lbs/Gal (5.98 kg/Gal) Bright Green - 13.02 Lbs/Gal (5.9 kg/Gal) Bright White - 13.26 Lbs/Gal (6.014 kg/Gal) *All colors are not available in all states Mix Ratio: One Pack Flash Point: N/A VOC: 113 Grams/Liter Film Thickness: 5 mils (127 µ) wet equals 2.75 (69.85 µ) dry per coat Recommended Coats: 3 full coats on entire hull Theoretical Coverage: 320 sq.ft./gal. (29.73 m2) @ recommended film thickness FEATURES & BENEFITS • Water-Based Bottom Paint • Safest, environmentally-friendly antifouling paint on the market • Over 80% lower VOC’s than solvent-based • Completely eliminates the leaching of copper compounds into the environment • Ablative and self-polishing • No barrier coat needed over most antifouling paints • Ideal for all types of craft – fiberglass to aluminum (Page 1 of 2) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 72

Open the catalog to page 1

MISSION BAY CSF™ Technical Data Sheet • Helps prevent electrolysis temperature, elapsed time including delay, etc. • Four brilliant colors Safety: Prior to use, obtain and consult the “Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary notices on container labels APPLICATION DETAILS SURFACE PREPARATION Method: Brush, roller or spray Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material using Sea Hawk S-80, S-90, or detergent washing. (SSPC-SPI). Induction/Sweat-in Time: Not applicable Thinner: Water,...

Open the catalog to page 2