Islands 77 Plus Advanced Dual Biocide Tin-Free 7700 Series SeaXJ^ Hawk tS PREMIUM YACHT FINISHES Maximum Performance for All Vessels • Maximum Protection Available • PL3 Advanced Dual Biocide Technology • Harder, Self-Polishing Boosted Ablative for Longer Life • Multi-Season Performance • TBT-Free- Product Description Islands 77 Plus was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments. Using the newest biocide technology, a revolutionary polymer binder system "PL3" produces an engineered dual biocide release that leaves no harmful effects on the environment. The result is a multi-season self-polishing paint that provides equivalent protection to tin-based formulas. Features and Benefits • Advanced Dual Biocide PL3 Release Technology for Longer Life • Harder, Self-Polishing Polymer Binding System • Highest Grade of Cuprous Oxide Available • Better Color Consistency for Color Matching • Provides Fouling Protection Equivalent to TBT Type Products Product Information Colors: Black, Light Blue, Dark Blue, Red, Green Finish/Sheen: Semi-Gloss Biocide Content: 4.14% Copper Content: 38.06% (all Colors) Volume Solids: 57% +\- 2% Solids by Weight: 80% +/- 2% Application Controls Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Dry Times and Overcoating Intervals: Pleasure Craft Drying time in Hours Shipping Weight: 15-16 Lbs./Gal. Flash Point: 100° F VOC: 377 Grams/Liter Typical Film Thickness: Pleasure Craft: 3.0 mils dry film thickness (DFT) per coat, (5.3 mils wet film thickness (WFT)) Commercial Marine: 4.0-5.0 mils DFT per coat by spray appli-cation (7.0- 8.8 Mils WFT) Recommended Coats: 2 heavy coats on entire hull and 3 at waterline and other high wear areas Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. Theoretical Coverage: 315 Sq.Ft./Gal. @ 2.9 mils DFT NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints

Islands 77 Plus Surface Preparation Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI) Advanced Biocide TBT-Free Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compatibility Chart to ensure compatibility when applying Islands 77 Plus antifouling paint over existing bottom paint. Previously Painted Surfaces: Islands 77 is suitable for this substrate. For correct procedures please refer to the Application Guidelines for Fiberglass/Gelcoat. Fiberglass or Vinyl Ester Hulls: Islands 77 Plus...