Islands 44 TF™ - 3 Pages

Add to MyNauticExpo favorites
Islands 44 TF™

Catalog excerpts

Sea Hawk PREMIUM YACHT FINISHES Islands 44 TF™ 1000TF Series Technical Data Sheet Revision date: Applies Directly Over Tin-Based (TBT) Paints Powerful Dual-Biocide Antifouling • Maximum protection for multiple seasons • Effective in fresh, brackish and salt waters • Premium quality raw materials and biocides • Lloyds Register certified Colors: Finish/Sheen: Sizes: Volume Solids: Solids by Weight: Shipping Weight: Flash Point: VOC: Copper Leach Rate: PRODUCT INFORMATION PRODUCT DESCRIPTION Islands 44 TF is an advanced, tin-free self-polishing, dual-biocide enhanced antifouling coating suitable for multi-season use in fresh, brackish and salt waters. It's Low VOC formulation complies with rigid limits set by the California Air Quality Management Board and offers boatyards a slime resistant yacht finish with California-compliant VOC emissions and low copper leach rate while providing boat owners high performance antifouling that is compatible with virtually every solvent-based bottom paint, including those containing tin (TBT). High volume solids maximize surface coverage to yield reduced paint usage and cut labor costs. Suitable for both sailing and motor yachts, Islands 44 TF dries to a glossy sheen which helps reduce drag yielding improved speed with less fuel consumption. Black, Dark Blue, Blue, Red and Teal are available to complement every top-side color scheme. Typical Film Thickness: Pleasure craft: 2.4-4.3 mils dry film thickness(DFT) per coat, (4.0-7.0 mils wet film thickness(WTF)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas Pleasure craft(California/Reduced CU2O Leach Rate Application): 2.4-4.3 mils dry film thickness(DFT) per coat, (4.07.0) mils wet film thickness(WTF)), 2 coats on entire hull Coverage (DFT):    228-408 Sq Ft/Gal FEATURES AND BENEFITS • Dual-Biocide Antifouling (High purity Cuprous Oxide combined with pharmaceutical-grade Econea®) protects against both hard and soft growth preventing barnacles and slime from degrading boat hulls • PL4 Self-polishing copolymer resin technology is compatible with virtually every solvent-based bottom paint and dries to a durable, glossy sheen • Controlled Release Formulation ensures biocides are dispersed at a precise rate independent of water type and complies with California copper leach rate restrictions NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com

 Open the catalog to page 1

Sea Hawk PREMIUM YACHT FINISHES Islands 44 TF™ 1000TF Series Technical Data Sheet • High Solids Volume Content maximizes surface coverage while reducing paint usage and application time APPLICATION DETAILS Method:    Spray, roller or brush Induction/sweat-in time: 0 Thinner:    Sea Hawk 2053 Cleaner:    Sea Hawk 2031 LIMITATIONS Apply in good weather when air and surface temperatures are above 50°F (10°C). For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in...

 Open the catalog to page 2

Technical Data Sheet Airless Spray: Minimum 33:1–2 GPM ratio pump; “0.017-0.026” orifice tip; 3/8” ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Conventional Spray: Please contact your Sea Hawk representative for more specific information. Safety: Prior to use, obtain and consult the “Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary notices on container labels. Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. (Page 3 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street...

 Open the catalog to page 3

All Sea Hawk catalogs and brochures

  1. CUKOTE 330 VOC

    3 Pages

  2. AF-33

    2 Pages

  3. Cukote

    2 Pages

  4. Islands 77 Plus

    2 Pages

  5. Mission Bay CSF

    2 Pages

  6. Mission Bay

    2 Pages

  7. Smart Solution

    2 Pages

  8. Biocop TF

    3 Pages

  9. Gel Coat

    2 Pages

  10. S-90

    1 Pages

  11. Silver Bullet?

    2 Pages

  12. sHAWKocon?

    2 Pages

  13. S-76

    2 Pages

  14. S-75 and S-75C

    2 Pages

  15. Tuff Stuff

    3 Pages

  16. Hawk Filler

    2 Pages

  17. Aluma Hawk

    2 Pages

  18. BiocopTF

    3 Pages

  19. Hawks Grip

    2 Pages

  20. Tin Booster

    1 Pages

  21. Bio-Boost

    1 Pages

  22. Talon

    2 Pages

  23. Sharkskin

    2 Pages

  24. Monterey

    2 Pages

  25. Cukote Biocide

    2 Pages

Archived catalogs

  1. Brochure

    20 Pages