Hawk Epoxy RESIN - 4 Pages

Add to MyNauticExpo favorites
Hawk Epoxy RESIN

Catalog excerpts

Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing Revision date: March 2014 Construction and Repairs • Fiberglass Construction & Repairs • Home Construction & Repairs • Bonds to Most Surfaces including Wood, Fiberglass, Metals, Foam, Plastic and Fabrics PRODUCT DESCRIPTION STEP 1 - EPOXY RESIN (CHOOSE SYSTEM SIZE) HAWK EPOXY is a 100% clear, lowviscosity, low-blush system designed for ease of use in the widest variety of construction and repair projects. R1 Epoxy Resin - a smooth, low-viscosity liquid epoxy resin. With a variety of Hawk Epoxy Catalysts, it can be cured under a wide range of temperatures and environmental conditions to form a highstrength plastic with superior moisture barrier characteristics. The flexibility of HAWK EPOXY lies in its huge range of CATALYST and FILLERS to adapt to any situation. If you need a fast cure due to schedule constraints or if you need a very thick fairing compound, HAWK EPOXY has the situation covered. After the application is cured, it can be sanded into fine tuned shape for the highest quality finish. Epoxy Resin - 1 Quart Epoxy Resin - 1 Gallon Epoxy Resin - 4.35 Gallon Epoxy Resin Drum - TBD Hawk Epoxy is available in four system sizes color coded on each label. Note: Mix ratios vary by catalyst. For optimal product utilization, be sure to choose the same Size for both the resin and catalyst. Refer to page 4 for Directions for Use. STEP 2 - SELECT YOUR CATALYST Hawk Epoxy Catalyst Minimum Recommended Temperature (˚F) Working Time Thin Film* Cure to Solid Thin Film* Cure to Working Strength Mix Ratio Resin/ Catalyst For use in the warmest conditions or when more time is needed for application C1 Ultra Slow Catalyst C2 Slow Cure Catalyst For use in colder temperatures or when a fast cure is needed With it’s ease of use, thin layer roll out capabilities and low blush, HAWK EPOXY is the easy choice for all epoxy resin projects. Resin/ Catalyst Advantages C3 Fast Cure Catalyst C5 Clear Finish Catalyst For use in clear coating, carbon fiber application or reduced blush in humid conditions *Epoxy cures faster at higher temperatures and in thicker applications. (Page 1 of 4) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com

 Open the catalog to page 1

Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing C1 ULTRA SLOW CURE CATALYST/R1 RESIN C2 SLOW CURE CATALYST/R1 RESIN Size 1 Size 2 Size 3 Size 4 Designed for use with HAWK EPOXY R1 Resin for construction and repairs with superior adhesion, strength, bonding, filling, and moisture barrier qualities at cooler temperatures and for a fast cure. Do not use under Sea Hawk marine wood varnish. Description Fast Cure Catalyst - .4 Pint Fast Cure Catalyst - .8 Quart Fast Cure Catalyst - .87 Gallon Fast Cure Catalyst - TBD System Size Ultra Slow Catalyst Quart - .66...

 Open the catalog to page 2

Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing STEP 3 - SELECT YOUR FILLER (OPTIONAL) HAWK EPOXY FILLER SELECTION GUIDE MORE STRENGTH LESS STRENGTH Bonding Hardware General Bonding Bonding with fillets Laminating Fairing Filler suitability: = Best F1 High Load Adhesive Fiber Filler - Thickens to a light grey color creating an easy to use adhesive designed for bonding hardware and other applications with dissimilar materials. This mixture will maximize bond strength for anticipated high loads. F2 Structural Adhesive Filler - Thickens to an off white color,...

 Open the catalog to page 3

Technical Data Sheet Epoxy Resin, Catalyst & Fillers Building, Bonding, Repairing RESIN & CATALYST DIRECTIONS FOR USE Preparation: Apply over clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent, such as, S-80 Wax N Grease Killer or detergent washing. (SSPC-SPI). Non-porous substrates must be sanded to create a rough surface for stronger bonding and adhesion. Remove all dust prior to application. DISPENSING: Do not adjust ratio (R1 Epoxy Resin/Catalyst) to alter cure time. Use the exact mixing ratio as described on page 2 of this document or on the Catalyst...

 Open the catalog to page 4

All Sea Hawk catalogs and brochures

  1. CUKOTE 330 VOC

    3 Pages

  2. AF-33

    2 Pages

  3. Cukote

    2 Pages

  4. Islands 77 Plus

    2 Pages

  5. Mission Bay CSF

    2 Pages

  6. Mission Bay

    2 Pages

  7. Smart Solution

    2 Pages

  8. Biocop TF

    3 Pages

  9. Gel Coat

    2 Pages

  10. S-90

    1 Pages

  11. Silver Bullet?

    2 Pages

  12. sHAWKocon?

    2 Pages

  13. S-76

    2 Pages

  14. S-75 and S-75C

    2 Pages

  15. Tuff Stuff

    3 Pages

  16. Hawk Filler

    2 Pages

  17. Aluma Hawk

    2 Pages

  18. BiocopTF

    3 Pages

  19. Hawks Grip

    2 Pages

  20. Tin Booster

    1 Pages

  21. Bio-Boost

    1 Pages

  22. Talon

    2 Pages

  23. Sharkskin

    2 Pages

  24. Monterey

    2 Pages

  25. Cukote Biocide

    2 Pages

Archived catalogs

  1. Brochure

    20 Pages