1. Catalogs
  2. Sea Hawk
  3. Captain Jack’s VARNISH

Captain Jack’s VARNISH

Captain Jack’s VARNISH

Captain Jack’s VARNISH

Product catalog summary
Product Overview
Captain Jack’s VARNISH™ and Captain Jack’s FAST FLASH VARNISH™ are premium high gloss marine varnishes with UV filter protection, offering a traditional warm amber color. They are designed for easy brushability, durable finish, good water resistance, superior self-leveling properties, and extra UV protection.

Product Specifications
  • Color: Amber
  • Finish: High Gloss
  • Sizes: Gallon, Quart, Pint
  • Volume Solids: 45%
  • Solids by Weight: 51%
  • Shipping Weight: 7-8 lbs./gal. (3.17-3.62 kg/Gal)
  • Flash Point: 100ºF (38°C)
  • VOC: 420 Grams/Liter
  • Film Thickness: 3.3 mils wet equals 1.5 mils dry
  • Coverage: 481 Sq Ft/Gal (44.68 m2)

Application Details
  • Method: Brush or Spray
  • Number of Coats: Bare wood - 4 minimum, Over existing varnish - 2 minimum
  • Thinner/Cleaner: Mineral Spirit
  • Application Temperature: 40°F Min/90°F Max (4°C Min/32°C Max)

Drying Schedule
  • Captain Jack’s VARNISH at 77˚F (25˚C): Touch Dry 4-8 hrs, Tack Free 10-14 hrs, Dry Hard 24-40 hrs
  • Captain Jack’s FAST FLASH VARNISH at 77˚F (25˚C): Touch Dry 2-4 hrs, Tack Free 5-7 hrs, Dry Hard 12-20 hrs

Limitations
  • Do not shake varnish; stir gently to avoid air bubbles.
  • Ensure correct coating amount using specified coverage and mil thickness.
  • Avoid application in direct sunlight or windy conditions.
  • Use proper PPE when spraying.

Surface Preparation
  • Wood must be clean, dry, and properly prepared.
  • Sand with the grain and remove sanding residue.
  • For bare wood, apply at least 4 coats, sanding between coats.
  • For previously varnished wood in good condition, apply 2 coats after cleaning and sanding.
  • For poor condition, remove old varnish and treat as bare wood.

Safety
Consult the Safety Data Sheet for health and safety information and observe all precautionary notices on container labels.
See more

Catalog excerpts

Captain Jack’s VARNISH-1

Sea Hawk PREMIUM YACHT FINISHES Captain Jack’s VARNISH™ - V1000 Series and Captain Jack’s FAST FLASH VARNISH1 Technical Data Sheet Revision date: July 2018 - V1100 Series Premium High Gloss Marine Varnish with traditional warm amber color • Easy brushability ^ • Durable finish with good water resistance • Superior self-leveling properties • Extra UV Protection • Good gloss retention Marine Varnish With UV Filter Protection PRODUCT DESCRIPTION Captain Jack's Varnish has been designed for the highest quality work, with outstanding results and durability. A combination of high quality pure phenolic modified tung oil provide excellent weathering performance and will enhance the richness and beauty of the wood with classic bright work appearance. Colors: Finish/Sheen: Sizes: Volume Solids: Solids by Weight: Shipping Weight: Flash Point: VOC: Film Thickness: PRODUCT INFORMATION Amber color High Gloss Gallon, Quart and Pint 45% 51% 7-8 lbs./gal. (3.17-3.62 kg/Gal) 100°F (38°C) 420 Grams/Liter 3.3 mils (83.8 g) wet film thickness (WFT) equals 1.5 mils (38.1 g) dry film thickness (DFT) 481 Sq Ft/Gal (44.68 m2) FEATURES AND BENEFITS • Extra UV protection • Good gloss retention • Easy brushability Method: Brush or Spray Number of coats: Bare wood: 4 minimum Over existing varnish: 2 minimum Thinner: Mineral Spirit if needed Cleaner: Mineral Spirit NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPai

 Open the catalog to page 1
Captain Jack’s VARNISH-2

Sea Hawk PREMIUM YACHT FINISHES Captain Jack’s VARNISH™ - V1000 Series and Captain Jack’s FAST FLASH VARNISH™ - V1100 Series Technical Data SheetCaptain Jack’s VARNISH DRYING SCHEDULE 3.3 MILS WET @ 50%H Substrate Temp. Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. LIMITATIONS Do not shake varnish, stir gently before application, being careful not to introduce air bubbles into the varnish. To prevent premature failure, ensure correct amount of coating is applied using the coverage and mil thickness as stated. To insure proper performance and coverage,...

 Open the catalog to page 2

All Sea Hawk catalogs and brochures

  1. BIOCOP TF

    3  Pages

  2. TROPIKOTE EX

    3  Pages

  3. R1

    4  Pages

  4. Tropikote™

    3  Pages

  5. AF-33

    2  Pages

  6. Cukote

    2  Pages

  7. Mission Bay

    2  Pages

  8. Gel Coat

    2  Pages

  9. S-90

    1  Page

  10. sHAWKocon?

    2  Pages

  11. S-76

    2  Pages

  12. Tuff Stuff

    3  Pages

  13. Hawk Filler

    2  Pages

  14. Aluma Hawk

    2  Pages

  15. BiocopTF

    3  Pages

  16. Hawks Grip

    2  Pages

  17. Tin Booster

    1  Page

  18. Bio-Boost

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.