Catalogs >
Sea Hawk >
BIOCOP TF

BIOCOP TF
1 / 3Pages

Catalog excerpts

Revision date: April 2019 Technical Data Sheet Advanced Dual Biocide Maximum Performance for All Vessels • Advanced dual biocide PL3 release technology • Maximum protection available • 38.06% Cuprous Oxide • Multi-season protection • TBT-Free – Lloyd’s Registry certified PRODUCT DESCRIPTION Biocop TF was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments. Using the newest biocide technology, a revolutionary polymer binder system “PL3” produces an engineered dual biocide release that leaves no harmful effects on the environment. The result is a multi-season self-polishing paint that provides equivalent protection to tin-based formulas. PRODUCT INFORMATION Colors: Red 1201-1, Light Blue 1202-1, Black 1205-1, Dark Blue 1230-1, Gray 1231-1, Green 1234-1 Finish/Sheen: Semi-Gloss Biocide Content: 4.14% (78 g/l) Copper Content: 38.06% (717 g/l) all colors Volume Solids: 57% (±2) Solids by Weight: 80% (±2) Shipping Weight: Black - 15.76 Lbs/Gal (7.15 kg/Gal) Blue - 15.76 Lbs/Gal (7.15 kg/Gal) Red - 15.76 Lbs/Gal (7.15 kg/Gal) Dark Blue - 16.0 Lbs/Gal (7.257 kg/Gal) Green - 15.76 Lbs/Gal (7.15 kg/Gal) Gray - 17.45 Lbs/Gal (7.915 kg/Gal) Teal - 15.67 Lbs/Gal (7.107 kg/Gal) *All colors are not available in all states Flash Point: 100°F (38°C) VOC: 377 Grams/Liter Typical Film Thickness: Pleasure craft: 3.0 mils (76.2 µ) dry film thickness(DFT) per coat, (5.3 mils (134.62 µ) wet film thickness(WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 3.0 mils (76.2 µ) dry film thickness (DFT) per coat, (5.3 mils (134.62 µ) wet film thickness (WFT)), 2 coats on entire hull. Commercial Marine: 4.0-5.0 mils (101.6-127 µ) DFT per coat by spray application (7.0-8.8 mils (177.8-223.52 µ) WFT), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Theoretical Coverage: 315 Sq.Ft./Gal. (29.2645 m2) @ 2.9 mils (73.66 µ) DFT. FEATURES & BENEFITS (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX

Open the catalog to page 1

Technical Data Sheet • Advanced Dual Biocide PL3 Release Technology for Longer Life • Harder, Self-Polishing Polymer Binding System • Highest Grade of Cuprous Oxide Available • Better Color Consistency for Color Matching • Provides Maximum Fouling Protection as TBT Type Products Aluminum: Biocop TF Antifouling paint may be used on an aluminum hull only when used with the proper barrier coat system described in Technical Bulletin AL1284. Biocop TF is not to be used on bare aluminum. • Lloyd’s Register certified (TBT-FREE) APPLICATION CONTROLS Method: This product may be applied by airless...

Open the catalog to page 2

Technical Data Sheet Induction Time: Not Applicable Thinning: If necessary, maximum 10% with Sea Hawk 2033, 2035 Cleaning: Sea Hawk 2033, 2035, Xylene Pot Life: Not Applicable Brush/Rolling: Solvent Resistant Roller Cover 3/8” (10 mm) pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1–2 GPM ratio pump; “0.017-0.026” (0.43-0.66 mm) orifice tip; 3/8” ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Conventional Spray: Please contact your Sea Hawk representative for more specific information. Safety: Prior to...

Open the catalog to page 3