Catalogs >
Sea Hawk >
Barrier Coat Primer

Barrier Coat Primer
1 / 2Pages

Catalog excerpts

1277 Great Moisture Barrier Barrier Coat Primer Chorinated Rubber- Great for Use Over Any Existing Bottom Paint Anticorrosive Properties Adhesion Promoter No Overcoat Window Product Description Cholorinated rubber based primer recommended for use over previous copper based antifoulants prior to recoating to insure excellent adhesion. High build, corrosion resistant, for use on new or old metal and fiberglass substrates. Benefits VS. Competition Compatible Over Existing Antifoulants No Other Comparable Product on the Market No Overcoat Window Best Adhesion Promoter in the industry Product Information Application Details Colors: Yellow Method: Brush, Roller or Spray Finish/Sheen: Flat Induction Time: Not Applicable Converter: One Pack Thinner: Sea Hawk 2044 Copper Content: N/A Cleaner: Sea Hawk 2044 Voume Solids: 31% (±2%) Pot Life: Not Applicable Overcoating Interval Solids by Weight: Mix Ratio: One Pack Shipping Weight: 10.29 Lbs./Gal. Flash Point: 80°F VOC: 594 Grams/Liter Film Thickness: 2 mils wet Recommended Coats: 1 Drying time in Hours Substrate Temp. Touch 73°F (23°C) 2 Hr Min. 1 Hr Max. N/A Launch 12 Hrs May be overcoated as little as 2 hours depending on atmospheric conditions: a recommended overnight dry before applying antifoulant. Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. Theoretical Coverage: 802 Sq.Ft./Gl @ recommended film thickness Revised 03/12 NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

Open the catalog to page 1

1277 APPLICATION Barrier Coat Primer Chlorinated Rubber Apply by brush, roller or spray. Apply 6 mils wet, which will yield 2 mils dry per coat. Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum 30:1 ratio pump; 1 GPM “0.013-0.023" orifice tip; 1/4" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Thinning If thinning is necessary, thin up to a maximum of 10%, with Sea Hawk 2031. Cleanup Clean all equipment immediately after use with Sea Hawk...

Open the catalog to page 2