- Catalogs
- Sea-Fire Europe Ltd
- Ventilation Dampers
Ventilation Dampers
Ventilation Dampers
- Constructed from stainless steel, with options for painted finishes.
- Available in circular units for fan coupling.
- Nominal dimensions range from LxHxD combinations, with lengths from 200mm to 1100mm, heights from 200mm to 1000mm, and diameters of 110mm and 150mm.
- Manual, pneumatic, and electrical actuator options.
- Accessories include a thermal cutout fuse that activates at 72°C and a limit switch for remote damper position signaling.
- Tested and approved for class A-60 divisions with a minimum insulation length of 600mm.
- Available in rectangular or circular formats with a size range from 100mm x 100mm to 1000mm x 1000mm, and multiple approved sizes up to 1580mm x 1000mm.
- Control modes include 24, 120, or 230 Volt electrical, pneumatic, or Explosion Proof (ATEX rated).
- Lloyds Register of Shipping, Marine Equipment Directive 96/98/EC, US Coast Guard, Germanischer Lloyds, and American Bureau of Shipping.
- Certificates available upon request.
- EMC A60 dampers are made from galvanized or stainless (316) steel, 1.2mm thick, with a 40mm flanged casing.
- Features 75mm interlocking aerodynamic blades made from 430 grade stainless steel, with optional 316 stainless steel blades and bearings.
Catalog excerpts
Summary: Stainless Steel construction Can be supplied painted Available as circular units for coupling to fans Methods of closure: Manual Pneumatic Electrical actuator Accessories: Thermal cutout fuse 72°C when the ambient temperature within the engine room reaches 72°C, the safety fuse trips thus opening the damper by means of a spring fitted on the lever coupling bar). These dampers are required for closing ventilation openings during discharge of the Sea-Fire extinguisher to maintain the correct agent design concentration. Limit switch to remotely signal damper position open or closed. H SEA-FIRE MARINE 9331-A Philadelphia Rd. Baltimore, MD 21237 USA PH: +1(410) 687-5500 FX: +1(410) 687-5503 [email protected] SEA-FIRE EUROPE LTD Unit 2 Discovery Voyager Park Portfield Road Portsmouth PO3 5FN UK PH: +44 (0) 2392 679666 FX: +44 (0) 2392 667014 [email protected] D NOMINAL DIMENSIONS LxHxD (mm) The dampers are available in all LxHxD combinations as shown in the table below and other custom designs on request. L H D Full engineering support and design service available, please contact us for more information.
Open the catalog to page 1
YOUR ONBOARD SAFE CHOICE FIRE SUPPRESSION TECHNOLOGY EMC-A60 Ships Wheelmark / MED Approved Series •Tested and approved for class A-60 divisions (bulkheads and decks) with a minimum length • 40mm flanged style casing in rectangular or circular format • Size range from 100mm x 100mm to 1000mm x 1000mm (single module) with a multiple • Choice of either 24, 120 or 230 Volt electrical control modes. • Pneumatic version or Explosion Proof (ATEX rated) control modes available. DAMPER WIDTH* • Lloyds Register of Shipping Approval to IMO Fire Test Procedures Code, Annex 1.3 • Marine Equipment Directive...
Open the catalog to page 2All Sea-Fire Europe Ltd catalogs and brochures
Moisture Eliminators2 Pages
Commercial Marine ? IMO2 Pages
USCG2 Pages
Non-USCG8 Pages
U.S. Commercial Marine2 Pages
Archived catalogs
FT SERIES2 Pages
C-SERIES2 Pages
FD-FG SERIES2 Pages