U.S. Commercial Marine

1 / 2 PagesView full catalog

U.S. Commercial Marine

Product catalog summary

Specifications:

Main Power Supply: 24 VDC (± 4)
Backup Power Supply: 24 VDC (± 4)
Power Supply Protection: 5 Amp
Power Consumption: 0.5 Amp
Connection: 4 x 20 mm cable glands, Max Wire Size: 12 AWG (2.05 mm)
Dimensions: 255(w) x 180(h) x 61(d) mm / 10(w) x 7(h) x 2.4(d) in
Weight: 1 kg
Enclosure Materials: Polycarbonate Plastic

Product Overview:

The Sea-Fire Marine “FireStop” is a USCG approved conventional fire detection system designed for both commercial and recreational marine markets. It provides quick and clear identification of fire alarms and events, featuring a weather-resistant monitoring system capable of detecting fire, heat, and smoke.

Functions:

Fire and failure detection: fault (open or short circuit)

Inputs/Outputs:

CAT5 port for signal transmission to Display Panel (PN: 131-933) and Zone Identification Panel (ZIP) (PN: 131-529/548)
Display Panel and ZIP Push Button for Reset and Silencing of the Alarm
NAC Alarm Output: 2 amp max
Adapter Unit Reset Relay: 1 rated @ 16 Amps

System Capacity:

Standard 2 zone system (Accommodation and Engine Room)
Zone Capacity: 2 detectors and/or manual call points per zone
Expandable to 4 zones per Adapter Unit (PN: 131-520) and up to 16 zones per Zip Panel (PN: 131-548/529)
Compatible with Hochiki marine detectors and accessories

Protection and Operating Requirements:

Ingress Protection: IP66
Operating Temperature: -25°C to 70°C (-13°F to 158°F)
Mounting: Surface Mount

Compliance:

Conforms to UL864

Contact Information:

SEA-FIRE MARINE, 9331-A Philadelphia Rd., Baltimore, MD 21237 USA, PH: +1(410) 687-5500, FX: +1(410) 687-5503, [email protected]

Catalog excerpts

^^/^R^ULB FIRE SUPPRESSION TECHNOLOG YOUR ONBOARD SAFE CHOICE ™ ffmt*W■#f ^* FIRE DETECTION & ALARM - FIRESTOP Sea-Fire Marine "FireStop" is a USCG approved conventional fire detection system that provides quick and clear identification of fire alarms and The Fire Control Panel (FCP) features a weather resistant monitoring system with fire, heat and smoke monitoring capability. Designed for the increasing sophistication of modern vessels in the commercial and recreational marine market, this innovative accessory compliments Sea-Fire's fire suppression product offering to meet the aesthetic value of intuitive operation and increased safety The detection system is the ultimate economical choice for the commercial and recreational marine «BTOP FIRE CONTROL PANa DETECTION AND MONITORING SYSTEM Part Number 131-501 Fire Stop Fire Control Panel Electrical Specifications Mechanical Specifications

Open the catalog to page 1

Zone Identification Panel PN: 131-529 Silence Enable Switch PN: 131-909 Display Panel PN: 131-933 Heat Detector PN: 130-821 Manual Pull Station PN: 131-923 Smoke Detector PN: 130-822 24VDC Main Supply 24VDC Backup Supply Functions Fire and failure detection: fault (open or short circuit). Environmental Protection Protection Level: Operating Requirements: • CAT5 port for receiving and sending signals to the Display Panel (PN: 131-933) and Zone Identification Panel (ZIP) (PN: 131-529 (gray) or 131-548 (black)). Surface Mount Conforms to UL864. • Display Panel and ZIP Push Button (Reset and Silencing...

Open the catalog to page 2

All Sea-Fire Europe Ltd catalogs and brochures

Archived catalogs

FT SERIES
2 Pages
C-SERIES
2 Pages
FD-FG SERIES
2 Pages