The Moisture Eliminators are custom manufactured in Polypropylene for maximum durability. The droplet separation efficiency of the units is achieved by special profiles which are arranged vertically to remove all moisture in the air flow. Front discharge Internal discharge Available in black or white, these units can also be supplied primed ready for painting. Features of this product are: • • • • High efficiency droplet separation Corrosion resistance Ease of installation Custom made sizes and design SEA-FIRE MARINE 9331-A Philadelphia Rd. Baltimore, MD 21237 USA PH: +1(410) 687-5500 FX: +1(410) 687-5503 [email protected] SEA-FIRE EUROPE LTD Unit 2 Discovery Voyager Park Portfield Road Portsmouth PO3 5FN UK PH: +44 (0) 2392 679666 FX: +44 (0) 2392 667014 [email protected] Combined Moisture Eliminator, Damper and Fan Unit For maximum efficiency and space saving it is possible to combine the above products. Please contact us for further information.

Series SB 20 The SB20 droplet eliminator is employed where the air face velocity is between 1 and 6 m/s. Thanks to its geometrical form, its removes even the fine droplets at low air face velocity. The three changes of flow direction, combined with the three lips permit a high water to air ratio (2 l/m3). The blade spacing of this eliminator is 25 mm. Blade Profile Cross Section Perdita di carico dell'aria Air pressure drop diametro limite della goccia droplet limiting diameter Full engineering support and design service available, please contact us for more information.