ULTRASOUND TRANSMITTER DESIGNED FOR THE TIGHTNESS INSPECTION OF CLOSED VOLUMES AND SPACES THAT CANNOT BE PRESSURIZED OR DEPRESSURIZED. Light-weighted, featuring small footprint and 2-frequency emission, it is designed for the control of doors, frames, windows, cold chambers, fridges or any other medium-sized volume. Simple to use, it includes two light indicators (voltage, battery charge, etc.) and two control keys (“on/off” and “+20 dBµV boost”) . It also includes a transducer output that can be used to insert a transducer in a space that is narrow or difficult to access, such as a pipe, a wall base, etc. A clever combination allows programming automatic shutdown. A USB port is used to power up the instrument through a computer or to update the embedded firmware if required. SDT International - Bd. de l’Humanité, 415 - 1190 Brussels - Belgium - Phone : +32 (0) 2 332 32 25 - Email : [email protected] SDT North America - 1532 Ontario Street, Cobourg, ON - Phone: 1-800-667-5325 | 1-905-377-1313 - email: info@sdthea

T-SONIC1 ULTRASONIC TRANSMITTER FEATURES Description : T-Sonic1 is a directional Bi-sonic Ultrasound Transmitter including a single transducer. Designed for tightness inspection of constructions or industrial products, T-Sonic should be used in combination to an Ultrasound Receiver as the SDT270 or the SDT200. General Transmitter frequencies Vobulation period Transmitted Sound Pressure Level at 100 cm, Ref. 0 dB=0.0002 µbar Beam angle with -6 dB of attenuation Power supply Autonomy with Alkaline batteries Environmental Operating temperature range IP rating Mechanical Housing material Weight including...