CONMONSense Range CONMONSense range includes standalone sensors with both 4-20mA and 0-10V standard output. 3 types are available: Contact or structure, Airborne open, Airborne enclosed. CONMONSense Range is a Standalone, Permanent Mount, Ultrasound Sensor designed to integrate with standard industrial measurement systems. CONMONSense delivers precise, repeatable data about the health of your assets and electrical systems also in the most challenging environment. Its internal design element is optimized for ultrasound driven lubrication, mechanical fault detection, and monitoring the health of valves, steam, hydraulic systems and electrical defects. CONMONSense sensors can be used in multiple applications: - Contact/structure (IP65) for bearings lubrication, valves, steam traps, hydraulics systems and rotating assets inspections, even the slowest ones. - Airborne open (IP40) and enclosed (IP65) mainly for inspection of electrical systems and leak detection. Ultrasound is a true measure of the FITness of your facility. Most assets produce FRICTION, IMPACTING, and TURBULENCE as defect indicators. CONMONSense captures these phenomena at their inception and delivers an analog response (signal or RMS value) to your measurement system. With an output range from 4-20mA or from 0-10V, CONMONSense mounts permanently to any asset to provide continuous condition monitoring data. The 0-10V sensor ouputs are directly compatible with the VIGILANT system powered by SDT. Avoid unplanned downtime and put the safety of your plant and colleagues first.

SPECIFICATIONS 4-20mA Contact Sensor IP65 / 0-10V Contact Sensor IP65: • Static (RMS value) or dynamic (heterodyned signal) output • Onboard amplification stages • Built-in analog filters • Hardware calibration • On board ambient T° measurement (through serial communication) Technical data: Weight IP rating Power supply Operating T° Pinout voltage Resonant frequency • Non-volatile memory (used to save configuration and recover sensor state/mode upon power outage) • Unique ID • Digital I/O communication for simple use • Serial communication for advanced use Gain range Gain step Connector size...