Mouldguard Flyer
4Pages

SCOTT BADER Temporary Protective Coating Crysticr Mouldguard Markets/ Applications CHEMICAL CONTAINMENT WIND ENERGY ANY FRP OR STEEL SURFACE NEEDING Crystic Mouldguard is a tough temporary coating specially designed for protecting moulds and mouldings. Often, decommissioned moulds are stored outside where they are subjected to standing water, UV light, dirt and frost and can become damaged or scratched. Many hours are usually wasted repairing moulds, cleaning and polishing the gelcoat surface ready for re-use. Most moulders would agree that they rarely achieve the same quality of surface that they had before storage. Protects moulds and mouldings from damage, so eliminating the need for costly repairs. Significant time and cost savings are made in labour and materials as moulds can be back in production in a fraction of Easy to apply - simply add 2% MEKP catalyst and brush or spray a single coat onto a mould surface, which must have release agent. need sealing first and release agent applied.H •see separate data sheet and application guide. Quick curing Easy to remove - simply peel from the surface it is protecting Prevents air, moisture, dirt, UV light! and frost from attacking the mould surface. Weather resistant in warm or wet conditions for in excess of 12 month! Tougher than water-based coatings. ^

Crystic® Mouldguard Scott Bader has formulated Crystic Mouldguard to give moulders the solution they have been looking for to save significant time and money. It is available in both brush and spray variants and is very easy to use and remove. A simple spray or brush coat cures quickly to give a weather resistant tight plastic film which can be peeled away easily revealing a perfectly clean surface, even after being outside for many months exposed to the elements. Application Guide Crystic Mouldguard should be applied at a thickness of 0.5 - 0.6mm. This means approximately 600-700g/m2 of...

Longterm Storage Moulds can be covered with Crystic Mouldguard and left outside for long periods of time. The mould shown below had been left outside for 6 months before Crystic Mouldguard was removed very easily revealing a mould surface in excellent condition. Pack Sizes : Available in 25kg kegs and 225kg drums Customer Endorsements "We were pleased to see that the Mouldguard did exactly what is said on the tin. Mould halves took quite a battering from the elements over a 6-8 month period outside. Surprisingly the product stayed on the mould. The surfaces were like new upon removal. This...

Scott Bader Composites Europe HEAD OFFICE Scott Bader Company Limited email: composites@scottbader.com email: composites@scottbader.fr Scott Bader Iberica email: composites@scottbader.es email: composites@scottbader.de Scott Bader Ireland email: composites@scottbader.ie Scott Bader Scandinavia AB email: composites@scottbader.se Scott Bader Eastern Europe Czech Republic email: composites@scottbader.cz Chromos Tvornica Smola DD email: cts@chromos-cts.hr Scott Bader Group Companies email: info@scottbaderinc.com Scott Bader (Pty) Limited Republic of South Africa email:...