Chinese Catalog
4Pages

Fastening solutions for textile application 应用于织物上的 紧固件解决方案 The Original German Quality Fastener Only by S

Our standard fastening system for your application 我们为您提供的标准紧固件 The upper part with small head 标准型上部头小 The upper part with big head 标准型上部头大 The upper part XL for a clamping area of up to 6 mm XL型上部夹紧范围可达6mm The upper part XXL (height 10 mm) in two versions: with long thread for 10 mm clamping area with short thread for 3 mm clamping area XXL型上部(高度10mm) 有两款： 长螺纹，夹紧范围为10mm 短螺纹，夹紧范围为3mm Our new LOXX® upper part Heavy Duty is a guarantee for even more endurance and better handling due to its ingenious improvement on the inside. It is a protected development and available in all our designs and...

Made in Germany! Lower part for fabric-to-fabric application 用于结合织物的下部 Lower part with oval plate, for screwing or riveting Standard plate (L = 27,0 mm) and TBR-Plate (L = 34,2 mm) 可上螺钉或铆接的椭圆形下部 标准型 (长=27,0mm) 和TBR型 (长=34,2mm) Lower part, round plate, 100% stainless steel With drill holes for screwing or riveting, without drill holes for glueing 100%不锈钢圆形下部 以钻孔上螺钉或铆接 免钻孔粘合 Self-cutting screws - thread stainless steel Available in different standard lengths and finishes. Available also in special lengths and finishes upon request (within a few weeks). 自削螺丝 - 不锈钢螺纹 我们有各式各样的标准长度与外观设计，供您选择。...

Made in Germany! History Schaeffer was founded in Wuppertal in 1876. In addition to press buttons, metal clips and eyelets, also different small metal goods were produced. Since 1928 Schaeffer produces the "original German snap fastener" for the automotive industry under the brand “DER ORIGINAL-KNOPF”. In 2008 the company Schaeffertec is founded under new management. The machinery and the know-how are acquired together with the complete workmanship. LOXX® is launched . ® Consequently Schaeffertec registers LOXX as communiIn the beginning of 2009 the brand ty trade mark in Europe and later...