DI13 080M. 249 kW (338 hp)
1 / 2Pages

SCANIA MARINE engines The marine engines from Scania are based on a robust design with a strength optimised cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes repairability and fuel economy. The engines are type approved in all major classification societies.   The engine is equipped with a Scania developed Engine Management System, EMS, in order to ensure the control of all aspects related to engine performance. The injection system is based on electronically controlled unit injectors that gives low exhaust emissions with good fuel economy and a high torque already at low revs. The engine can be fitted with many accessories such as air cleaners, PTOs, transmissions and type approved instrumentation in order to suit a variety of installations. Engine speed (rpm) Rating Gross power, full load (hp, metric) Gross power, propeller curve (kW) Gross power, full load (kW) Gross power, propeller curve (hp, metric) Spec fuel consumption. Full load (g/kWh) Spec fuel consumption. Propeller curve (l/h) Optional equipment • Hydraulic pump • Side-mounted PTO • Front-mounted PTO • Exhaust connections • Electrical base system • Control and instrument panels • Accelerator position sensor • Engine heater • Power pack engine bracket • Stiff rubber suspension • Air cleaner • Studs in flywheel housing • Reversible fuel filter • Low coolant level reaction • Variable idle speed setting • Low and extra low oil sump • Long oil dipstick • Oil level sensor • Bilge pump Spec fuel consumption. 1/2 load (g/kWh) Engines with heat exchanger: • Sea water pump • Heat exchanger with expansion tank Spec fuel consumption. 3/4 load (g/kWh) Standard equipment • Scania Engine Management System, EMS • Unit injectors, PDE • Turbocharger • Fuel pre-filter with water separator • Fuel filter • Oil filter, full flow • Centrifugal oil cleaner • Oil cooler, integrated in block • Oil filler, in engine block • Oil dipstick, in block • Starter, 2-pole 7.0 kW • Alternator, 2-pole 100A • Flywheel SAE 14 • Silumin flywheel housing, SAE 1 flange • Front-mounted engine brackets • Protection covers • Closed crankcase ventilation • Operator’s manual Optimum fuel consumption (g/kWh) Heat rejection to coolant (kW) ICFN – Continuous service: Rated power available 1 h/1 h. Unlimited h/year service time at a load fac

SCANIA MARINE engines Engine description Working principle Firing order Compression ratio Weight (excl oil and coolant) 1285 kg (Engine with heat exchanger) 1180 kg (Engine with keel cooling) High position alloy steel Steel pistons Connection rods I-section press forgings of alloy steel Alloy steel with hardened and polished bearing surfaces Electrical system Propeller curve, assumed exponent 2.5 Full load curve 1000 1200 1400 1600 (l/h) 1800 Propeller curve, assumed exponent 2.5 Full load curve 1000 1200 1400 1600 Propeller curve, assumed exponent 2.5 Full load curve Spec fuel consumption...