DI13 078M
2Pages

{{requestButtons}}

Catalog excerpts

DI13 078M - 1

SCANIA MARINE engines DI13 078M. 368 kW (500 hp) IMO Tier II, US Tier 2, EU Stage IIIA The marine engines from Scania are based on a robust design with a strength optimised cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes repairability and fuel economy. The engines are type approved in all major classification societies.   The engine is equipped with a Scania developed Engine Management System, EMS, in order to ensure the control of all aspects related to engine performance. The injection system is based on electronically controlled unit injectors that gives low exhaust emissions with good fuel economy and a high torque already at low revs. The engine can be fitted with many accessories such as air cleaners, PTOs, transmissions and type approved instrumentation in order to suit a variety of installations. Gross power, full load (kW) Gross power, full load (hp, metric) Gross power, propeller curve (kW) Gross power, propeller curve (hp, metric) Spec fuel consumption. 3/4 load (g/kWh) Spec fuel consumption. 1/2 load (g/kWh) Spec fuel consumption. Propeller curve (l/h) Optional equipment • Hydraulic pump • Side-mounted PTO • Front-mounted PTO • Exhaust connections • Electrical base system • Control and instrument panels • Accelerator position sensor • Engine heater • Power pack engine bracket • Stiff rubber suspension • Air cleaner • Studs in flywheel housing • Reversible fuel filter • Low coolant level reaction • Variable idle speed setting • Low and extra low oil sump • Long oil dipstick • Oil level sensor • Bilge pump Spec fuel consumption. Full load (g/kWh) Standard equipment • Scania Engine Management System, EMS • Unit injectors, PDE • Turbocharger • Fuel pre-filter with water separator • Fuel filter • Oil filter, full flow • Centrifugal oil cleaner • Oil cooler, integrated in block • Oil filler, in engine block • Oil dipstick, in block • Starter, 2-pole 7.0 kW • Alternator, 2-pole 100A • Flywheel SAE 14 • Silumin flywheel housing, SAE 1 flange • Front-mounted engine brackets • Protection covers • Sea water pump • Heat exchanger with expansion tank • Closed crankcase ventilation • Operator’s manual Optimum fuel consumption (g/kWh) Heat rejection to coolant (kW) IFN – Intermittent service: Intended for intermittent use where rated power is available 1 h/3 h. Accumulated load factor must not exceed 80% of rated power.

Open the catalog to page 1
DI13 078M - 2

SCANIA MARINE engines DI13 078M. 368 kW (500 hp) IMO Tier II, US Tier 2, EU Stage IIIA Output Engine description No of cylinders Working principle Firing order Compression ratio High position alloy steel Steel pistons Connection rods I-section press forgings of alloy steel Alloy steel with hardened and polished bearing surfaces Electrical system Propeller curve, assumed exponent 2.5 Full load curve Test conditions Air temperature +25°C. Barometric pressure 100 kPa (750 mmHg). Humidity 30%. Diesel fuel acc. to ECE R 24 Annex 6. Density of fuel 0.840 kg/dm3. Viscosity of fuel 3.0 cSt at 40°C....

Open the catalog to page 2

All Scania catalogs and brochures

  1. DI13 070M

    2 Pages