Summary of Technical Data on Hydraulic Components and Wheel Revolutions

This document provides specifications and operational parameters related to hydraulic pumps, cylinders, steering gears, and wheel revolutions for various equipment sizes and configurations.

1. Hydraulic Components

• Pumps and Cylinders: Various models are listed, including HC 400, HC 550, HC 700, HC 850, HC 1050, HC 1600, HC 2100, and HC 3200. Some configurations use dual units, such as (2 x HC 1600) and (2 x HC 1050).
• Hydraulic Steering Gears: Specific models mentioned include HC 2100 (with dual HC 1050 units) and HC 1600.

2. Wheel Revolutions

• Wheel revolutions are specified for different equipment setups, with values ranging from 3.6 to 10.7 revolutions.
• Examples include 3.6, 4.0, 4.6, 5.3, 5.4, 6.7, 6.8, 7.0, 8.5, and 10.7 wheel revolutions.

3. Equipment Size and Corresponding Parameters

• Boat or equipment lengths are categorized into ranges such as <5.5 m, 5 - 6.5 m, 6 - 7.5 m, 7 - 9 m, 8.5 - 11 m, 10 - 13 m, 12 - 14 m, and 13 - 15 m.
• These size ranges correlate with specific hydraulic components and wheel revolution requirements.

4. Model References

• Models HP 05, HP 05 OB, HP 07, HP 09/80, and HP 09/100 are mentioned, likely referring to pump or hydraulic system variants suited for different boat lengths.

Key Points and Recommendations

• Selection of hydraulic pumps and cylinders should consider the equipment size and required wheel revolutions to ensure optimal performance.
• Dual pump configurations (e.g., 2 x HC 1600) are used for higher capacity needs.
• Hydraulic steering gears are matched to the pump models and equipment size for effective steering control.

This summary captures the essential technical parameters and model references for hydraulic systems and wheel revolutions related to various equipment sizes, facilitating appropriate component selection and system design.