The hydraulic steering system consists of one (or more) hydraulic pumps and cylinders interconnected through hoses which transfer the oil pressure from the pumps into the cylinder thereby turning the rudder blade in wanted direction. Depending on requirements, a by-pass valve, dual non-return valve (if not already built into a pump) and pressure relief valve can be installed into the system. By-pass valve is used for a quick change-over from hydraulic to manual steering in case of need and on vessels where regulations prescribe it (and it is also very practical for sailing boats). By opening...

Hydraulic steering systems HKS 05 are recommended in the following combinations: HP 05 with HC 400 and HC 550, HP 05 OB with HC 700 and HC 850 (or ev. HC 1050). They are designed for pleasure boats, sailing boats and for smaller work boats and fishing boats, length up to 9 m. For fast boats and speedboats with outboard power up to 120 kW we recommend a combination of HP 05 OB cylinder HC OB. Pump HP 05 (OB) is an axial piston with 5 pistons of stainless steel, in the case of aluminum alloy, which is also the hydraulic oil tank. Cylinders HC 400-850 are made of stainless steel and bronze and are...

© ¤¦¯¸¡¢º¨§³¥¥¦¢£¼¨§§³¥°§¨©ÆǨ«È¨¯¦¥¨¦¥º±°°¥£¤¥¤¨¢£¨³½¥¨²±¡¡±É ¢£¼¨º±°´¢£¯³¢±£§Ê¨©Ë¨«È¨É¢³½¨©¨ª«¬«¨±¦¨©¨ª®««»¨Ì½¥¨¯¦¥¨ ¤¥§¢¼£¥¤²̈±¦¹̈¡¥¯§¸¦¥¨´±¯³§Í¨§¯¢¡´±¯³§Í¨¯º½³§Í¨¯£¤²̈±¦É̈±¦Î¢£¼¨´±¯³§¨ ¯£¤¨²¢§½¢£¼¨´±¯³§Í¨¡¥£¼³½¨¸¹¨³±¨ªÁ¨°» ˸°¹¨©Ë¨«È¢̈§¨¯£¨¯Ï¢̄¡¹̈¢§³±£É̈¢³½È̈¹̈¢§³±£§±̈²¨§³¯¢£¡¥§§¨§³¥¥¡Í¢̈£³̈½¥¨ º¯§¥¨±²¨¯¡¸°¢£¸°¨¯¡¡±Í¨É½¢º½¨¢§¨¯¡§±¨³½¥¨½¤¦¯¸¡¢º¨±¢¡¨³¯£Î» ¡¢£¤¥¦§¨©¨ª«¬«¨¨ª®««¨¯¦¥¨°¯¤¥¨±²¨§³¯¢£¡¥§§¨§³¥¥¡¨¯£¤¨´¦±£µ¥¨ ¯£¤¨¯¦¥¨¶¥¦¨¥¯§¨³±¨¢£§³¯¡¡¨¯£¤¨¦¥·¸¢¦¥¨£±¨§¹¥º¢̄¡¨°¯¢£³¥£¯£º¥» © ¤¦¯¸¡¢º¨¹¢¹¢£¼¨¢§¨°¯¤¥¨±²¨³½¥¦°±¹¡¯§³¢º¨±¦¨º±¹¹¥¦¨¹¢¹¥§¨¾±¨ª¿¨ ÀÁÂèÄÅ»

Hydraulic steering systems HKS 09 are recommended in the following combinations: HP 09/80 and HP 09/100 with HC 2100 or HC 3200. They are designed for pleasure boats, sailboats, yachts, and for working boats and fishing boats, length up to 18 m. Pump HP 09 is an axial piston with 9 pistons of stainless steel, in the case of aluminum alloy, which is also the hydraulic oil tank. Cylinders are made of stainless steel and bronze and are very easy to install in pairs as HC 2100 - 3200 and require no special maintenance. Hydraulic piping is made of hydraulic rubber, or steel, or copper pipes No 15...

Hydraulic steering systems HKS 09 PRO are recommended in the following combinations: HP 09/80 and HP 09/100 with HC 4500 or HC 6000 and HP 09/160 with HC 8000 or HC 12100. They are designed for yachts, as well as for professional ships, ferries, tourist and fishing vessels, length up to 30 m. Pump HP 09 is an axial piston with 9 pistons of stainless steel, in the case of cast iron, which is also the hydraulic oil tank. Cylinders HC 4500-12000 are made of stainless steel and steel, and the base of graphite cast iron castings and are very easy to install and require no special maintenance. Hydraulic...