*mynauticexpo

531710

Product catalog summary

Overview: The PumpMaster 45 (PM45) series are air-operated piston pumps designed for high-pressure applications, particularly where extra pressure output is needed or in cold temperatures where low air pressure might affect performance. These pumps are suitable for grease up to NLGI-2 viscosity and can be used in large distribution systems with multiple outlets.

Specifications:

Air Consumption: 925 NL/min (32.6 scfm) at 5 bar (70 psi) air pressure.
Air Inlet: 1/2" BSP (F).
Air Motor Effective Diameter: 115 mm (4.5 ").
Air Motor Stroke: 100 mm (4 ").
Operating Air Pressure Range: 1.5 - 7 bar (20 - 100 psi).
Cycles per Litre: Approximately 80 cycles.
Delivery Rate: 2 kg/min (4.5 lb/min).
Delivery per Cycle: 7.5 kg (16 lb).
Fluid Inlet Type: Chop-check.
Fluid Outlet: 1/2" BSP (F).
Maximum Free Flow Delivery: 7.5 kg/min (16.5 lb/min).
Maximum Outlet Pressure: 490 bar (7105 psi).
Noise Level: 80 dB at 1 m (3.3’) from the pump.
Pressure Ratio: 70:1.
Pump Mounting: 185 kg (400 lb) drums.
Total Height: 1357 mm (53.4 ").
Tube Height: 855 mm (33.7 ").
Weight: 25 kg (55 lb).
Wetted Materials: UHMWPE, Cast iron, PTFE, Steel, NBR, Hard chromed steel.

Model Variants:

Model 531710: Designed for 185 kg (400 lb) drums with a tube height of 855 mm (33.7 ") and total height of 1357 mm (53.4 ").
Model 531720: Suitable for 50 kg (120 lb) drums with a tube height of 650 mm (25.6 ") and total height of 1152 mm (45.3 ").
Model 531730: For bulk tote mounting with a tube height of 490 mm (19.3 ") and total height of 992 mm (39 ").

Additional Information: For further details, contact SAMOA Industrial, S.A. at their Gijón, Spain location or visit their website at www.samoaindustrial.com.

Catalog excerpts

PNEUMATIC PISTON GREASE PUMP, PUMPMASTER 45, PM45 - 70:1, 185 KG (400 LB) DRUMS PM45 series air operated piston pumps. High pressure double acting pump for use in applications that require extra pressure output or when cold temperatures a low air pressure could limit pump performance. Pumps can be used with grease up to NLGI-2 viscosity. These pumps can be used in large distribution systems that include simultaneous operation outlets. Pumps are available for cover mount to 50 kg 120 lb and 185 kg - 400 lb open drum and for horizontal and side mount on grease totes and bags. Air consumption at 5 bar (70 psi) air pressure, NLGI-2 grease at 20 °C (68 °F) and 80 cpm. Noise level measured at 1 m (3.3’) from the pump, 7 bar (100 psi) air pressure and free delivery. DATOS TÉCNICOS Air motor effective diameter Air pressure operating range Cycles per litre (aprox.) Fluid inlet Fluid inlet type Fluid outlet Maximum free flow delivery (SI) 7.5 kg/min, 16.5 lb/min, 7.5 kg/min Maximum outlet pressure Noise level Pressure ratio Pump mounting Total height Tube height Wetted materials UHMWPE, Cast iron, PTFE, Steel, NBR, Hard chromed steel Instructions manu

Open the catalog to page 1

Pump mounting Pump mounting Bulk tote Tube height Tube height Total height Total height Tube height Total height SAMOA Industrial, S.A. Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 Gijón - España Tel.: (+34) 985 381 488 - Fax: (+34) 985 384 163 [email protected] www.samoaindustrial.c

Open the catalog to page 2

531710

531710

Catalog excerpts

All Samoa catalogs and brochures