Technical lighting since 1927 Amenity light fitting for outdoor

VOUET 100 OUTDOOR LIGHTING SAMMODE’S AMENITY LIGHT FITTING Ø 100 mm Lighting spaces with outdoor traffic flows (entrances, bus shelters, etc.) demands the use of light fittings that meet the specific constraints linked with the presence of the public, the lighting performance and energy efficiency requirements as well as responding to the need for aesthetic integration. With a luminous flux of 1500 lm, VOUET 100 fittings are designed for amenity lighting, enabling, in particular, the requirements of the accessibility to be achieved for the entrances to buildings. They have the robust housings...

THE RIGHT LIGHTING FOR GREATER ENERGY SAVINGS Lighting can make a substantial contribution to energy savings. The ranges VOUET 100 offer different solutions to optimise your installation by integrating lighting control adapted to your needs. Lighting control Lighting scenes ON-DEMAND LIGHTING: ON-OFF VERSIONS Coupled to an external presence detector, the VOUET 100 ON-OFF versions switch on only when triggered: this is the simplest solution for significantly reducing energy consumption in low-traffic areas. MAINTAINING SAFETY: ON-10% VERSIONS In some areas a minimum of light is needed to indicate...

VOUET 100 OUTDOOR LIGHTING FROM OUTDOOR FACILITIES... The range VOUET 100 is a lighting solution that reduces energy consumption while offering an adapted light level for outdoor facilities. It achieves an average illuminance of 20 lux at floor level, recommended in the construction of residential buildings providing access for those with disabilities.

…TO STREET FURNITURE VOUET 100’s intrinsic qualities make it a light fitting that is ideally suited for lighting street furniture such as kiosks, bus or tramway shelters, etc. Its ease of integration and the characteristics of its housing enable it to contribute to the aesthetics and longevity of the architectural project. To optimize your installation, contact Sammode or our local distributor

luxCONTROL lighting co SWITCH sensors oitcnuf ni-nrub eht gnitratS d ,eulav dlohserht eht teS • t teS .noitisop + eht ot sret + eht ot neht dna noitisop – ws niamer spmal ehT .emit .yllacitamotua oitcnuf ni-nrub eht gnitratS wop eht no dna ffo hctiwS • er spmal ehT .emit ni-nrub .yllacitamotua strats neht noitcnuf ni-nruB al ,desu tsrif era yeht nehW yeht taht os demmidnu dna .rerutcafunam eht yb deific Diameter of the detection cone as a function of height at maximum detection area without taking objects in the room into consideration. Stationary objects (walls, tables, floor-standing luminaires,...

MAIN REFERENCES : ON-OFF VERSIONS VERSIONS WITH INTEGRATED SENSOR VERSIONS FOR EXTERNAL SENSOR MAIN REFERENCES FLUX ILml DESIGNATION VERSIONS WITH INTEGRATED SENSOR VERSIONS FOR EXTERNAL SENSOR * The luminaires can be used in combination with an external sensor, a timer or a twilight switch (not provided). OPTION CODE DESCRIPTION CABLE ENTRIES 2 cable glands in nickel-coated brass End caps and fixing straps in 316L stainless steel MR nternal colour gelatine LFXXX (Colour XXX to be defined from the Lee Filter colour chart] Fixing straps with tamper-resistant Torx screw Cable plate in stainless...

We reserve the right to make technical changes • © Sammode - 05/2014 – european area version