PAULI 1 HT 100 T MAX. 100°C - 1 OR 2 T8 LAMPS - GLASS DIFFUSER - SEPARATE GEAR IMPERVIOUS TUBULAR LIGHT FITTING FOR USE AT HIGH TEMPERATURES Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning Mechanical assembly not sensitive to external mechanical and/or chemical aggression Borosilicate glass: high resistance to corrosion, chemical agents and temperatures Single-piece housing, material and components selected to ensure long-term investment ELECTRICAL CLASS PROTECTION SHOCK RESISTANCE OPERATING TEMPERATURE • Ø100 borosilicate diffuser in the 1-lamp model, Ø135 in the 2-lamp model • End caps 1/2 ring press-formed in 304L stainless steel (316L also available) • Gaskets moulded in silicone • Cable entry with cable gland GEAR TRAY • White powder coated steel sheet gear tray • Offset low loss compensated ferromagnetic gear unit (EEI B1) • Internal wiring with silicone isolation braided with glass fibre • White powder-coated gear tray acting as a reflector for general diffused lighting • Range of technical reflectors in mirror-finish aluminium sheeting: intensive (narrow beam), extensive (wide beam) INSTALLATION – MAINTENANCE • Connection to 5x2,5 mm² disconnectable terminal block • Connection on the gear tray to 6x2,5 mm² terminal block for 1-lamp models, to 7x2,5 mm2 terminal block for 2-lamp models • Maximum distance connection between the gear tray and the light fitting: 50 m • Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360° orientation (available as a reinforced model and/or with closure by HSHC screw) • Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray 1• 1-T8-lamp model extensive reflector at +25°C 2• 1-T8-lamp model intensive reflector at +25°C 3• 2-T8-lamp model extensive reflector at +25°C

CABLE ENTRIES 1 cable gland in black polyamide Cable Ø: 5 to 12 mm Cable Ø: 7 to 14 mm 1 cable gland in nickel-coated brass Cable Ø: 5 to 14 mm OPTICS Intensive reflector (1-lamp versions) Extensive reflector DESCRIPTION OPTION CODE FINISHINGS End caps and fixing straps in 316L stainless steel FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw ACCESSORIES Protective covers Fixing for columns Upstand kit (5 or 20 cm) DESCRIPTION DIFFICULT ENVIRONMENTS Separate gear tray, supplied with the light fitting OPTION CODE SPECIAL APPLICATIONS Version 1 lamp 2 lamps NORMAL ENVIRONMENTS MAIN REFERENCES...